Telepresence Multipoint Switch SoftwareApplication · Cisco

CVE-2011-0387

HIGH · 8.0 CVSS v2.0 Published 2011-02-25
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
86/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
The administrative web interface on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x allows remote authenticated users to cause a denial of service or have unspecified other impact via vectors involving access to a servlet, aka Bug ID CSCtf97164.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

The administrative web interface on Cisco TelePresence Multipoint Switch (CTMS) devices running software versions 1.0.x, 1.1.x, 1.5.x, and 1.6.x contains a vulnerability in a servlet that allows remote authenticated users to cause denial of service or achieve unspecified other impact. This is an authenticated vulnerability requiring valid administrative credentials.

MitigationRestrict administrative web interface access to trusted networks or IP ranges, and update affected CTMS devices to a patched software version if available from Cisco.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Telepresence Multipoint Switch SoftwareApplication
Affected:= 1.0.4.0= 1.1.0= 1.1.1= 1.1.2= 1.5.0= 1.5.1= 1.5.2= 1.5.3= 1.5.4= 1.5.5= 1.5.6= 1.6.0
Telepresence Multipoint SwitchHardware / appliance
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
Single
Confidentiality
Partial
Integrity
Partial
Availability
Complete

AV:N/AC:L/Au:S/C:P/I:P/A:C

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Access the device CLI or administrative interface and retrieve the hardware model information. For Cisco TelePresence Multipoint Switch, check the product identifier or use 'show version' command output.
    Affected if The device model is Cisco TelePresence Multipoint Switch (CTMS)
  2. Check the software version
    Use the CLI command 'show version' or access the administrative web interface to view the installed software version. Compare against the affected versions: 1.0.4.0, 1.1.0, 1.1.1, 1.1.2, 1.5.0, 1.5.1, 1.5.2, 1.5.3, 1.5.4, 1.5.5, 1.5.6, and 1.6.0.
    Affected if The installed software version matches one of the listed affected versions
  3. Confirm administrative web interface is enabled
    Check the device configuration for the HTTP/HTTPS web interface service. Use 'show running-config' or similar command to verify if the web-based administrative interface (servlet) is currently enabled.
    Affected if The administrative web interface servlet is enabled and accessible
  4. Assess network exposure of the administrative interface
    Review firewall rules, ACLs, or network segmentation to determine if the administrative web interface is reachable from untrusted networks. Check which IP addresses are permitted to access the web interface.
    Affected if The administrative web interface is accessible from untrusted or external networks without proper access controls

The environment is affected if the device is a Cisco TelePresence Multipoint Switch running any of the listed software versions and the administrative web interface servlet is enabled and exposed.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Restrict administrative web interface access to trusted networks or IP ranges, and update affected CTMS devices to a patched software version if available from Cisco.

Fix this in Telepresence Multipoint Switch Software Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,200
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2011-0387 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2011-0387 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data