dbcve.org
Envy 100 D410Hardware / appliance · Hp

CVE-2011-1532

HIGH · 7.5 CVSS v2.0 Published 2011-04-15
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Unspecified vulnerability in the SNMP component on the HP Photosmart D110 and B110; Photosmart Plus B210; Photosmart Premium C310, Fax All-in-One, and C510; and ENVY 100 D410 printers allows remote attackers to obtain sensitive information or modify data via vectors related to the Embedded Web Server (EWS).

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

A vulnerability in the SNMP service within the Embedded Web Server (EWS) on specific HP Photosmart and ENVY printer models allows remote attackers to obtain sensitive information or modify device data via network-based vectors. The SNMP interface, typically used for network management, contains unspecified flaws that can be exploited without authentication.

MitigationApply the HP firmware update for affected printer models; if patching is not immediately possible, disable the SNMP service on the Embedded Web Server or restrict network access to trusted IP addresses.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Envy 100 D410Hardware / appliance
Affected:all versions
Photosmart B110Hardware / appliance
Affected:all versions
Photosmart D110Hardware / appliance
Affected:all versions
Photosmart Plus B210Hardware / appliance
Affected:all versions
Photosmart Premium C310Hardware / appliance
Affected:all versions
Photosmart Premium C510Hardware / appliance
Affected:all versions
Photosmart Premium Fax All In OneHardware / appliance
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
Partial
Integrity
Partial
Availability
Partial

AV:N/AC:L/Au:N/C:P/I:P/A:P

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify your printer model
    Locate the model label on the printer or check the device properties in your network administration console. Common locations include a label on the front or back of the unit, or the device information page printed from the printer.
    Affected if The model matches any of these: HP Envy 100 D410, HP Photosmart B110, HP Photosmart D110, HP Photosmart Plus B210, HP Photosmart Premium C310, HP Photosmart Premium C510, or HP Photosmart Premium Fax All In One.
  2. Determine the firmware version
    Access the Embedded Web Server by entering the printer IP address in a web browser, then navigate to the general information or about page to view the firmware version. If you do not know the IP address, check your router's connected devices list or print a network configuration page from the printer control panel.
    Affected if All firmware versions are affected for the models listed above.
  3. Verify the Embedded Web Server is accessible
    Open a web browser and navigate to http://[printer-ip-address] where [printer-ip-address] is the IP address of your printer. Confirm the EWS login page or device information page loads.
    Affected if The EWS is accessible over the network, indicating the web service is enabled.
  4. Confirm SNMP service status
    Access the EWS via the web browser, then look for a Network Settings, SNMP, or Services section. Check whether SNMP is enabled or the SNMP community string is configurable. Alternatively, send an SNMP walk request to the printer IP address using tools like snmpwalk or snmpget on port 161.
    Affected if SNMP is enabled and responding on the network, making the vulnerability exploitable.
  5. Check network exposure
    Determine whether the printer IP address is reachable from untrusted networks. Review your router firewall rules, VLAN configuration, or access control lists to see if the printer is isolated or accessible from the internet or guest networks.
    Affected if The printer and its SNMP service are reachable from networks outside your trusted local network.

You are affected if your printer model matches one of the listed HP models, the Embedded Web Server is accessible, and SNMP is enabled and exposed to untrusted network segments.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply the HP firmware update for affected printer models; if patching is not immediately possible, disable the SNMP service on the Embedded Web Server or restrict network access to trusted IP addresses.

Fix this in Envy 100 D410 Scoped from the published advisory
  • Consultation2.0 h
  • Implementation3.0 h
  • Testing2.0 h
  • Review / QA1.0 h
8.0 hours of engineering $1,420
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,272.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2011-1532 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2011-1532 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data