dbcve.org
iOSOperating system · Cisco

CVE-2011-1624

HIGH · 7.8 CVSS v2.0 Published 2011-08-18
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
87/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Cisco IOS 12.2(58)SE, when a login banner is configured, allows remote attackers to cause a denial of service (device reload) by establishing two SSH2 sessions, aka Bug ID CSCto62631.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

A denial of service vulnerability in Cisco IOS 12.2(58)SE allows remote attackers to cause device reload by establishing two SSH2 sessions when a login banner is configured. The vulnerability is triggered during the SSH login process with a specific banner configuration.

MitigationUpgrade Cisco IOS to a patched version beyond 12.2(58)SE, or remove the login banner configuration as a temporary workaround if immediate upgrade is not feasible.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
iOSOperating system
Affected:= 12.2\(58\)se

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
None
Integrity
None
Availability
Complete

AV:N/AC:L/Au:N/C:N/I:N/A:C

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Check Cisco IOS version
    Execute 'show version' or 'show running-config | include version' to display the installed IOS version
    Affected if The version shown is exactly 12.2(58)SE
  2. Verify SSH server is enabled
    Execute 'show ip ssh' or check the configuration with 'show running-config | include ssh' to confirm SSH is configured
    Affected if SSH server is enabled and accepting connections
  3. Confirm login banner is configured
    Execute 'show running-config | include banner' or 'show banner login' to check if a login banner exists
    Affected if A login banner (via 'banner login' or similar command) is configured on the device
  4. Identify active SSH sessions
    Execute 'show users' or 'show ssh' to view current SSH connections
    Affected if Two or more SSH2 sessions can be established concurrently to the device

The environment is affected if running exactly Cisco IOS 12.2(58)SE with SSH enabled and a login banner configured, as the vulnerability requires the specific version and the combination of SSH access plus a login banner to trigger device reload.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Upgrade Cisco IOS to a patched version beyond 12.2(58)SE, or remove the login banner configuration as a temporary workaround if immediate upgrade is not feasible.

Fix this in iOS Scoped from the published advisory
  • Consultation3.0 h
  • Implementation6.0 h
  • Testing3.0 h
  • Review / QA2.0 h
14.0 hours of engineering $2,490
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,984.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2011-1624 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2011-1624 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data