Opengear Console Server FirmwareApplication · Opengear

CVE-2011-3997

HIGH · 7.5 CVSS v2.0 Published 2011-11-09
Fix available
A fix is available. Upgrade to after 2.1.0u7 or later.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Opengear console servers with firmware before 2.2.1 allow remote attackers to bypass authentication, and modify settings or access connected equipment, via unspecified vectors.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Opengear console servers before firmware version 2.2.1 contain an authentication bypass vulnerability that allows remote attackers to circumvent authentication mechanisms. This enables unauthorized modification of device settings or access to connected equipment. The specific attack vectors were not publicly disclosed.

MitigationUpgrade Opengear console server firmware to version 2.2.1 or later. If immediate patching is not feasible, implement network segmentation and firewall controls to restrict access to management interfaces.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Opengear Console Server FirmwareApplication
Affected:<= 2.1.0u7= 2.0.4= 2.0.4u1= 2.0.6= 2.0.8= 2.0.9= 2.1.0= 2.1.0u1
Acm5000 Console ServerHardware / appliance
Affected:all versions
Cm4000 Console ServerHardware / appliance
Affected:all versions
Im4004 5 Console ServerHardware / appliance
Affected:all versions
Im4200 Console ServerHardware / appliance
Affected:all versions
Img4000 Console ServerHardware / appliance
Affected:all versions
Kcs6000 Rackside Console ServerHardware / appliance
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
Partial
Integrity
Partial
Availability
Partial

AV:N/AC:L/Au:N/C:P/I:P/A:P

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Access the device web interface or CLI and check the device information page for the model name (Acm5000, Cm4000, Im4004, Im4200, Img4000, Kcs6000, or generic Opengear Console Server)
    Affected if The device is any of the Opengear console server models listed in the affected products
  2. Check the installed firmware version
    In the device web interface, go to System > Status or use the CLI command 'version' to retrieve the firmware version
    Affected if The firmware version is 2.1.0u7 or lower, OR exactly matches any of these: 2.0.4, 2.0.4u1, 2.0.6, 2.0.8, 2.0.9, 2.1.0, 2.1.0u1 (versions before 2.2.1 are affected)
  3. Confirm network exposure of management interface
    Check if the device management interface (HTTP/HTTPS/SSH) is reachable from untrusted networks by reviewing firewall rules or network configuration
    Affected if The management interface is accessible from outside the local management network (the vulnerability allows remote authentication bypass)

You are affected if the device is an Opengear console server (Acm5000, Cm4000, Im4004, Im4200, Img4000, or Kcs6000) running firmware version 2.2.0 or lower, with its management interface exposed to network access.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to a release after 2.1.0u7
Interim mitigation

Upgrade Opengear console server firmware to version 2.2.1 or later. If immediate patching is not feasible, implement network segmentation and firewall controls to restrict access to management interfaces.

Fix this in Opengear Console Server Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation4.0 h
  • Testing3.0 h
  • Review / QA1.0 h
10.0 hours of engineering $1,750
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,800.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2011-3997 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2011-3997 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data