WiresharkApplication
CVE-2014-5162
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedThe read_new_line function in wiretap/catapult_dct2000.c in the Catapult DCT2000 dissector in Wireshark 1.10.x before 1.10.9 does not properly strip '\n' and '\r' characters, which allows remote attackers to cause a denial of service (off-by-one buffer underflow and application crash) via a crafted packet.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceThe Catapult DCT2000 dissector in Wireshark contains an off-by-one buffer underflow vulnerability in the read_new_line function within wiretap/catapult_dct2000.c. The function fails to properly strip newline (\n) and carriage return (\r) characters from input, causing memory corruption when processing crafted packets. This leads to denial of service via application crash.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data
WiresharkApplication
= 1.10.0= 1.10.1= 1.10.2= 1.10.3= 1.10.4= 1.10.5= 1.10.6= 1.10.7= 1.10.8CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Authentication
- None
- Confidentiality
- None
- Integrity
- None
- Availability
- Partial
AV:N/AC:L/Au:N/C:N/I:N/A:P
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Check installed Wireshark versionRun 'wireshark --version' or open Wireshark and go to Help > About Wireshark to view the version numberAffected if Version is 1.10.0, 1.10.1, 1.10.2, 1.10.3, 1.10.4, 1.10.5, 1.10.6, 1.10.7, or 1.10.8
-
Verify Catapult DCT2000 dissector is availableOpen Wireshark, go to Analyze > Enabled Protocols, and search for 'catapult_dct2000' or 'DCT2000' in the protocol listAffected if The Catapult DCT2000 protocol is present and enabled in the protocol list
-
Check for Catapult DCT2000 capture filesLook for files with .dct2000, .dct2k, or similar extensions in your capture directory or recent filesAffected if You have recently opened or have access to Catapult DCT2000-formatted capture files
You are affected if Wireshark version is 1.10.0 through 1.10.8 AND the Catapult DCT2000 dissector is enabled AND you process Catapult DCT2000 capture files
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataUpgrade Wireshark to version 1.10.9 or later. As a temporary mitigation, avoid opening untrusted Catapult DCT2000 capture files or disable the Catapult DCT2000 dissector until the update is applied.
Fix this in Wireshark
Scoped from the published advisory
- Consultation2.0 h
- Implementation3.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,800.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2014-5162 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2014-5162 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data