AsteriskApplication · Digium

CVE-2014-8415

MEDIUM · 5.0 CVSS v2.0 Published 2014-11-24
Fix available
A fix is available. Upgrade to 12.7.1 / 13.0.1 or later.
See remediation →
59/100
Remediation priority · Elevated
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Race condition in the chan_pjsip channel driver in Asterisk Open Source 12.x before 12.7.1 and 13.x before 13.0.1 allows remote attackers to cause a denial of service (assertion failure and crash) via a cancel request for a SIP session with a queued action to (1) answer a session or (2) send ringing.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

A race condition exists in the chan_pjsip channel driver of Asterisk where a remote attacker can send a CANCEL request for a SIP session that has a queued action to either answer the session or send ringing, triggering an assertion failure and crash.

MitigationUpgrade Asterisk to version 12.7.1 or later for the 12.x branch, or 13.0.1 or later for the 13.x branch to receive the patch that fixes this race condition.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
AsteriskApplication
Affected:>= 12.0.0, < 12.7.1>= 13.0.0, < 13.0.1

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Authentication
None
Confidentiality
None
Integrity
None
Availability
Partial

AV:N/AC:L/Au:N/C:N/I:N/A:P

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Verify Asterisk is installed
    Run 'asterisk -V' or 'asterisk --version' to display the installed Asterisk version
    Affected if No Asterisk binary is found or the version command fails
  2. Confirm the version falls within vulnerable range
    Compare your installed Asterisk version against the affected ranges: 12.0.0 through 12.7.0 for the 12.x branch, or 13.0.0 for the 13.x branch
    Affected if The installed version is 12.0.0 to 12.7.0 inclusive, or exactly 13.0.0
  3. Identify the active SIP channel driver
    Check for the presence of pjsip.conf configuration file in /etc/asterisk/ or examine your sip.conf for 'transport=pjsip' references; also check 'module show like pjsip' from Asterisk CLI
    Affected if The chan_pjsip module is loaded and pjsip is configured as the SIP transport
  4. Confirm SIP service is exposed
    Check if port 5060 (or custom SIP port) is listening with 'netstat -tulpn | grep sip' or 'ss -tulpn | grep 5060'; verify the system accepts remote SIP traffic
    Affected if Asterisk is listening on a UDP/TCP SIP port and is reachable from network

You are affected if Asterisk version is 12.0.0-12.7.0 or 13.0.0, chan_pjsip is loaded, and the system accepts SIP traffic that could receive a CANCEL request for an in-progress session.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to 12.7.1 / 13.0.1 or later
Fixed in 12.7.113.0.1
Interim mitigation

Upgrade Asterisk to version 12.7.1 or later for the 12.x branch, or 13.0.1 or later for the 13.x branch to receive the patch that fixes this race condition.

Fix this in Asterisk Scoped from the published advisory
  • Consultation3.0 h
  • Implementation6.0 h
  • Testing6.0 h
  • Review / QA3.0 h
18.0 hours of engineering $3,120
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $4,992.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2014-8415 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2014-8415 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data