CVE-2014-9693
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedHuawei Tecal RH1288 V2 V100R002C00SPC107 and earlier versions, Tecal RH2265 V2 V100R002C00, Tecal RH2285 V2 V100R002C00SPC115 and earlier versions, Tecal RH2265 V2 V100R002C00, Tecal RH2285H V2 V100R002C00SPC111 and earlier versions, Tecal RH2268 V2 V100R002C00, Tecal RH2288 V2 V100R002C00SPC117 and earlier versions, Tecal RH2288H V2 V100R002C00SPC115 and earlier versions, Tecal RH2485 V2 V100R002C00SPC502 and earlier versions, Tecal RH5885 V2 V100R001C02SPC109 and earlier versions, Tecal RH5885 V3 V100R003C01SPC102 and earlier versions, Tecal RH5885H V3 V100R003C00SPC102 and earlier versions, Tecal XH310 V2 V100R001C00SPC110 and earlier versions, Tecal XH311 V2 V100R001C00SPC110 and earlier versions, Tecal XH320 V2 V100R001C00SPC110 and earlier versions, Tecal XH621 V2 V100R001C00SPC106 and earlier versions, Tecal DH310 V2 V100R001C00SPC110 and earlier versions, Tecal DH320 V2 V100R001C00SPC106 and earlier versions, Tecal DH620 V2 V100R001C00SPC106 and earlier versions, Tecal DH621 V2 V100R001C00SPC107 and earlier versions, Tecal DH628 V2 V100R001C00SPC107 and earlier versions, Tecal BH620 V2 V100R002C00SPC107 and earlier versions, Tecal BH621 V2 V100R002C00SPC106 and earlier versions, Tecal BH622 V2 V100R002C00SPC110 and earlier versions, Tecal BH640 V2 V100R002C00SPC108 and earlier versions, Tecal CH121 V100R001C00SPC180 and earlier versions, Tecal CH140 V100R001C00SPC110 and earlier versions, Tecal CH220 V100R001C00SPC180 and earlier versions, Tecal CH221 V100R001C00SPC180 and earlier versions, Tecal CH222 V100R002C00SPC180 and earlier versions, Tecal CH240 V100R001C00SPC180 and earlier versions, Tecal CH242 V100R001C00SPC180 and earlier versions, Tecal CH242 V3 V100R001C00SPC110 and earlier versions could allow attackers to execute arbitrary code or restart the system via crafted DNS packets.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceMultiple Huawei Tecal server models contain a vulnerability in DNS packet processing that allows remote attackers to execute arbitrary code or cause system restart via crafted DNS packets. This suggests a buffer overflow or injection flaw in the DNS service component of the server management firmware.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data<= v100r002c00spc107= v100r002c00<= v100r002c00spc115<= v100r002c00spc111= v100r002c00<= v100r002c00spc117<= v100r002c00spc115<= v100r002c00spc502CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the server modelAccess the server management interface (iBMC/BMC web UI or CLI) and locate the hardware or system information section to confirm the exact model number (e.g., Rh1288 V2, Rh2285 V2, etc.)Affected if The model is one of: Rh1288 V2, Rh2265 V2, Rh2285 V2, Rh2285h V2, Rh2268 V2, Rh2288 V2, Rh2288h V2, or Rh2485 V2
-
Check the firmware versionIn the iBMC/BMC web interface, navigate to the firmware version or system information page. Alternatively, use the CLI command 'ipmcget -t version' to retrieve the firmware version stringAffected if The firmware version falls within or matches the affected ranges: <= v100r002c00spc107 (Rh1288 V2), = v100r002c00 (Rh2265 V2, Rh2268 V2), <= v100r002c00spc115 (Rh2285 V2), <= v100r002c00spc111 (Rh2285h V2), <= v100r002c00spc117 (Rh2288 V2), <= v100r002c00spc115 (Rh2288h V2), <= v100r002c00spc502 (Rh
-
Determine if DNS service is enabled on management interfaceIn the iBMC/BMC web UI, navigate to Network Services or DNS settings. Alternatively, use the CLI command 'ipmcget -t dns -v' to check if the DNS service is configured and active on the management interfaceAffected if DNS service is enabled and accessible on the server management interface (iBMC/BMC)
-
Verify management interface network exposureCheck the network configuration of the iBMC/BMC management interface to determine if it is reachable from network segments outside the local administrative network. Review IP address settings, subnet mask, and gateway configurationAffected if The management interface with DNS service has an IP address routable from untrusted networks
The environment is affected if the server is a Tecal Rh* V2 model running firmware version within the specified affected ranges AND the DNS service on the management interface is accessible to the attacker
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply Huawei firmware updates for all affected Tecal server models to the latest vendor-supported versions. Implement network segmentation to restrict DNS access to management interfaces and consider IDS monitoring for anomalous DNS traffic.
- Consultation6.0 h
- Implementation16.0 h
- Testing8.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $9,600.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2014-9693 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2014-9693 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data