CVE-2015-3441
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedThe Parental Control panel in Genexis devices with DRGOS before 1.14.1 allows remote authenticated users to execute arbitrary CLI commands via the (1) start_hour, (2) start_minute, (3) end_hour, (4) end_minute, or (5) hostname parameter.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceThe Parental Control panel in Genexis DRGOS devices before version 1.14.1 contains an authenticated command injection vulnerability. Remote attackers with valid credentials can execute arbitrary CLI commands by injecting them into parameters including start_hour, start_minute, end_hour, end_minute, or hostname in the Parental Control web interface.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data<= 1.14CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the device model and firmware versionAccess the device web interface or check the administrative console to confirm the device is a Genexis DRGOS device and note the firmware version number. This is typically visible on the main status page or system information section.Affected if The firmware version is 1.14 or lower (any version <= 1.14)
-
Confirm the Parental Control feature is accessibleLog into the device web interface and navigate to the Parental Control panel. Verify that the feature is present and accessible with administrative credentials.Affected if The Parental Control panel is enabled and accessible with valid admin credentials
-
Check if remote administrative access is enabledInspect the device network settings to determine if the web management interface (HTTP/HTTPS on ports 80/443 or similar) is bound to WAN/external interfaces or if access is restricted to LAN only.Affected if The administrative web interface is accessible from WAN/untrusted networks
-
Verify credential securityReview whether default administrative credentials are in use or if strong, unique passwords have been configured for the device admin account.Affected if Default credentials are still in use or weak passwords are configured for the admin account
A device is affected if it is a Genexis DRGOS device running firmware version 1.14 or lower, has the Parental Control panel accessible, and an attacker could obtain valid administrative credentials to reach the vulnerable parameters.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataUpgrade DRGOS firmware to version 1.14.1 or later to remediate the command injection vulnerability. If immediate patching is not feasible, restrict administrative interface access to trusted networks only and ensure strong, unique credentials are in use.
- Consultation4.0 h
- Implementation2.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,152.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2015-3441 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2015-3441 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data