dbcve.org
Te60 FirmwareOperating system · Huawei

CVE-2015-8672

MEDIUM · 5.3 CVSS v3.0 Published 2016-01-12
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
62/100
Remediation priority · Elevated
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
The presentation transmission permission management mechanism in Huawei TE30, TE40, TE50, and TE60 multimedia video conferencing endpoints with software before V100R001C10SPC100 allows remote attackers to cause a denial of service (wired presentation outage) via unspecified vectors involving a wireless presentation.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

The presentation transmission permission management mechanism in Huawei TE30, TE40, TE50, and TE60 video conferencing endpoints has a flaw that allows remote attackers to cause a denial of service to wired presentation functionality via unspecified vectors related to wireless presentation.

MitigationUpgrade Huawei TE30/TE40/TE50/TE60 endpoints to software version V100R001C10SPC100 or later.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Te60 FirmwareOperating system
Affected:<= v100r001c10b022

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
Low

CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Access the video conferencing endpoint's admin interface or run 'display device' via CLI to confirm the model is one of: TE30, TE40, TE50, or TE60
    Affected if Model is TE30, TE40, TE50, or TE60
  2. Check the firmware version
    Access the admin interface system information page or run 'display version' via CLI to retrieve the current firmware version
    Affected if Firmware version is v100r001c10b022 or earlier (any version <= v100r001c10b022)
  3. Determine if wireless presentation is configured
    Check the device's presentation settings in the admin interface under 'Presentation' or 'Content Sharing' settings, or run 'display presentation' via CLI to see if wireless presentation is enabled
    Affected if Wireless presentation feature is enabled on the device

The device is affected if it is a TE30, TE40, TE50, or TE60 model running firmware version v100r001c10b022 or earlier with wireless presentation functionality enabled.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Upgrade Huawei TE30/TE40/TE50/TE60 endpoints to software version V100R001C10SPC100 or later.

Fix this in Te60 Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation3.0 h
  • Testing2.0 h
  • Review / QA1.0 h
8.0 hours of engineering $1,420
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,272.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2015-8672 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2015-8672 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data