Jnr1010 FirmwareOperating system · Netgear

CVE-2016-11057

HIGH · 7.5 CVSS v3.1 Published 2020-04-28
Fix available
A fix is available. Upgrade to 2017-01-06 or later.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 2017-01-06, JWNR2010v5 before 2017-01-06, WNR1000v4 before 2017-01-06, WNR2020v2 before 2017-01-06, R6220 before 2017-01-06, and WNDR3700v5 before 2017-01-06.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

This vulnerability in multiple NETGEAR router models allows attackers to cause denial of service by making repeated URL calls to the device. The mishandling of these repeated requests leads to device malfunction or unresponsiveness. The CVSS 7.5 score indicates a high-severity availability impact via network-exploitable DoS.

MitigationUpdate NETGEAR router firmware to a version released on or after 2017-01-06 for the specific model. If firmware updates are unavailable, consider network segmentation to limit exposure and monitor for unusual traffic patterns indicating DoS attempts.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Jnr1010 FirmwareOperating system
Affected:< 2017-01-06
Jwnr2000 FirmwareOperating system
Affected:< 2017-01-06
Jwnr2010 FirmwareOperating system
Affected:< 2017-01-06
R6220 FirmwareOperating system
Affected:< 2017-01-06
Wndr3700 FirmwareOperating system
Affected:< 2017-01-06
Wnr1000 FirmwareOperating system
Affected:< 2017-01-06
Wnr2020 FirmwareOperating system
Affected:< 2017-01-06
Wnr614 FirmwareOperating system
Affected:< 2017-01-06

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
None
Availability
None

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify router model
    Log into the router web interface (typically at 192.168.1.1) or check the device label/sticker. Navigate to the Administration or Status page to confirm the exact model number (e.g., Jnr1010, Jwnr2000, R6220, Wndr3700, Wnr1000, Wnr2020, Wnr614).
    Affected if The model is one of: Jnr1010, Jwnr2000, Jwnr2010, R6220, Wndr3700, Wnr1000, Wnr2020, or Wnr614.
  2. Check firmware version
    In the router web interface, go to Administration > Firmware Update or Status page. Record the exact firmware version string displayed (often shown as a date like V1.0.0.10 or a date like 2016-12-15).
    Affected if The displayed firmware version date is earlier than 2017-01-06.
  3. Verify firmware build date
    If the version shows as a date rather than a number, confirm the build date. Compare the firmware date against the threshold date of 2017-01-06. For version strings without dates, check NETGEAR's release notes for your specific model to determine the build date.
    Affected if The firmware build date is before January 6, 2017.
  4. Confirm network exposure
    Determine if the router management interface is accessible from the internet or an untrusted network. Check port forwarding rules, WAN-facing IP access, and firewall configurations. Attempt to access the router from an external IP on port 80/443 if applicable.
    Affected if The router admin interface is exposed to untrusted networks, increasing exploitability.

The router is affected if it is one of the listed models (Jnr1010, Jwnr2000, Jwnr2010, R6220, Wndr3700, Wnr1000, Wnr2020, or Wnr614) AND its firmware version predates the 2017-01-06 release date.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to 2017-01-06 or later
Fixed in 2017-01-06
Interim mitigation

Update NETGEAR router firmware to a version released on or after 2017-01-06 for the specific model. If firmware updates are unavailable, consider network segmentation to limit exposure and monitor for unusual traffic patterns indicating DoS attempts.

Fix this in Jnr1010 Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation1.0 h
  • Testing2.0 h
  • Review / QA1.0 h
6.0 hours of engineering $1,060
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,696.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2016-11057 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2016-11057 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data