CVE-2017-12492
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceA Remote Code Execution vulnerability exists in HPE Intelligent Management Center (iMC) PLAT version 7.3 (E0504). The flaw allows authenticated attackers to execute arbitrary code on the affected system. This is a critical vulnerability in an enterprise network management product that could allow complete system compromise.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 7.3CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify HPE iMC PLAT versionLocate the iMC PLAT installation and check the version information, typically found in the product About section, version file, or installation logsAffected if The installed version is 7.3 (E0504)
-
Confirm exact build versionDetermine the full version string including the E-code (for example E0504), as the vulnerability applies to a specific build within the 7.3 releaseAffected if The build is E0504 or earlier in the 7.3 branch
-
Verify network accessibility of iMC management interfaceReview network configuration to determine if the HPE iMC web console or management ports are exposed to network attackersAffected if The iMC management interface is reachable from untrusted networks without proper access controls
-
Check authentication statusConfirm that valid credentials exist for the iMC platform, since exploitation requires authenticated accessAffected if Valid platform credentials are configured and accessible to potential attackers
The environment is affected if HPE Intelligent Management Center PLAT version 7.3 (E0504) is installed and the management interface is network-accessible to an attacker with valid credentials.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataUpgrade HPE Intelligent Management Center PLAT to version 7.3 (E0506) or later. If immediate patching is not possible, restrict network access to the iMC management interfaces and ensure proper authentication controls are in place.
- Consultation4.0 h
- Implementation8.0 h
- Testing8.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,656.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2017-12492 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2017-12492 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data