CVE-2017-12532
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceRemote Code Execution vulnerability in HPE Intelligent Management Center PLAT version 7.3 (E0504). The vulnerability was addressed in version 7.3 (E0506). Given the CVSS 8.8 score and RCE classification, the issue likely involves improper input validation or injection allowing arbitrary code execution.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 7.3CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Confirm HPE Intelligent Management Center is installedLook for HPE IMC installation in standard program directories or check Windows Services for 'HPE Intelligent Management Center' or 'imc' named servicesAffected if The software is present on the system
-
Identify the installed version of HPE IMC PLATCheck the software version through the Windows 'Add or Remove Programs' list, or look for a version file in the installation directory. The version typically displays as 7.3 with a build identifier such as E0504 or E0506.Affected if The installed version is 7.3 (E0504) specifically
-
Compare version to affected rangeIf the version is 7.3, identify the exact build (E0504, E0505, or E0506). Versions prior to E0506 are considered affected.Affected if The version is 7.3 (E0504) or 7.3 (E0505), or if the build cannot be determined and version is 7.3 without confirmed E0506 or later
-
Check if the management interface is network accessibleVerify if the HPE IMC web console port (default 8080 or 8443) is listening and exposed to the network. Use 'netstat -an | findstr 8080' or similar to check for LISTENING state.Affected if The IMC web interface is exposed to network attackers (untrusted networks)
-
Determine if authentication is bypassed for the vulnerable code pathReview logs for unusual authentication patterns or failed login attempts that may indicate exploitation attempts. This is a network-accessible RCE, so review access logs for the IMC endpoints.
You are affected if HPE Intelligent Management Center PLAT version 7.3 with build E0504 or E0505 is installed, or if version 7.3 is installed and you cannot confirm it is E0506 or later.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataUpgrade HPE Intelligent Management Center PLAT to version 7.3 (E0506) or any subsequent version to remediate this vulnerability.
- Consultation8.0 h
- Implementation4.0 h
- Testing16.0 h
- Review / QA8.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $9,856.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2017-12532 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2017-12532 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data