dbcve.org
Actively exploited in the wild. This CVE is on the CISA Known Exploited Vulnerabilities list — treat remediation as urgent. Federal remediation due by 17 Mar 2022.
iOSOperating system · Cisco

CVE-2018-0161

MEDIUM · 6.3 CVSS v3.1 Published 2018-03-28
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
In the wild Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID). An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG. This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

A vulnerability in the SNMP subsystem of Cisco IOS on certain Catalyst switches (2960-L Series, Digital Building Series 8P/8U) allows an authenticated remote attacker to cause denial of service by sending an SNMP GET request for the ciscoFlashMIB OID, triggering a SYS-3-CPUHOG condition that causes the device to restart.

MitigationUpgrade Cisco IOS to a version that addresses Cisco Bug CSCvd89541, or restrict SNMP access via access-lists and consider disabling SNMP if not required.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
iOSOperating system
Affected:= 15.2\(5\)e

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
High
Privileges
Low
User interaction
None
Scope
Changed
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Run 'show version' or check the device chassis to confirm it is a Cisco Catalyst 2960-L Series switch or Digital Building Series 8P/8U switch
    Affected if The device is NOT a 2960-L Series or Digital Building Series 8P/8U model - those are the only affected models
  2. Check the Cisco IOS version
    Run 'show version' and locate the IOS release number in the output
    Affected if The IOS version is 15.2(5)e - this is the vulnerable version listed in the affected products
  3. Verify SNMP is enabled
    Run 'show snmp' or 'show snmp group' to check if SNMP is configured and active on the device
    Affected if SNMPv2c or SNMPv3 is enabled - the vulnerability requires SNMP to be running to be exploitable
  4. Check SNMP community strings or user access
    Run 'show snmp community' to see configured community strings, or 'show snmp user' for SNMPv3 users
    Affected if Public or other community strings are accessible to untrusted networks - combined with SNMP enabled, this allows the attack vector

A device is affected if it is a 2960-L Series or Digital Building Series 8P/8U switch running Cisco IOS 15.2(5)e with SNMP enabled, regardless of community string strength since the attacker needs only authenticated SNMP access.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Upgrade Cisco IOS to a version that addresses Cisco Bug CSCvd89541, or restrict SNMP access via access-lists and consider disabling SNMP if not required.

Fix this in iOS Exploited in the wild — priority engagement
  • Consultation3.0 h
  • Implementation6.0 h
  • Testing3.0 h
  • Review / QA2.0 h
14.0 hours of engineering $2,490
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,984.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2018-0161 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2018-0161 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data