CVE-2018-1595
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedIBM Spectrum Symphony and Platform Symphony 7.1.2 and 7.2.0.2 could allow an authenticated user to execute arbitrary commands due to improper handling of user supplied input. IBM X-Force ID: 143622.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceIBM Spectrum Symphony and Platform Symphony 7.1.2 and 7.2.0.2 contain a command injection vulnerability allowing authenticated users to execute arbitrary OS commands due to improper handling of user-supplied input in the application's processing logic.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 6.1.1= 7.1.0= 7.1.1= 7.1.2= 7.2.0.2CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the installed product and versionLocate the IBM Symphony installation directory and check version files or use product-specific commands. Look for version.info, VERSION files, or run 'soamversion' or similar version-reporting binaries typically found in the installation bin directory.Affected if The installed version matches IBM Platform Symphony 6.1.1, 7.1.0, or 7.1.1, OR IBM Spectrum Symphony 7.1.2 or 7.2.0.2
-
Confirm the product typeDetermine whether the installation is IBM Platform Symphony or IBM Spectrum Symphony, as both are affected. Check the product name in installation logs, the management console, or the application's about page.Affected if The product is either IBM Platform Symphony (versions 6.1.1, 7.1.0, 7.1.1) or IBM Spectrum Symphony (versions 7.1.2, 7.2.0.2)
-
Verify authentication is enabledCheck the application's user authentication configuration. The vulnerability requires an authenticated user session. Examine whether local user authentication, LDAP integration, or other authentication mechanisms are configured and active.Affected if User authentication is enabled and users can log in to the Symphony application
-
Check for exposed management interfacesReview network exposure of Symphony web interfaces or APIs (typically on ports 8080, 8443, or custom ports). Identify if the management console or REST APIs are accessible from network locations where untrusted users could authenticate.Affected if The management interface is network-accessible to users who can obtain valid authentication credentials
Your environment is affected if you are running IBM Platform Symphony versions 6.1.1, 7.1.0, or 7.1.1, or IBM Spectrum Symphony versions 7.1.2 or 7.2.0.2, and the application accepts authenticated user input that could be processed in system calls.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply vendor patches or upgrade to a fixed version. Implement strict input validation and sanitization for all user-supplied parameters before they are used in system calls.
- Consultation4.0 h
- Implementation8.0 h
- Testing6.0 h
- Review / QA3.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,888.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2018-1595 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2018-1595 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data