CVE-2018-21175
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedCertain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D6100 before 1.0.0.57, R6100 before 1.0.1.20, R7800 before 1.0.2.40, R9000 before 1.0.2.52, WNDR3700v4 before 1.0.2.92, WNDR4300 before 1.0.2.94, WNDR4300v2 before 1.0.0.50, WNDR4500v3 before 1.0.0.50, and WNR2000v5 before 1.0.0.62.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceMultiple NETGEAR router models contain a stack-based buffer overflow vulnerability in their firmware. An authenticated attacker can send specially crafted input to exploit the overflow, potentially allowing arbitrary code execution or complete device compromise. The vulnerability affects specific firmware versions of D6100, R6100, R7800, R9000, WNDR3700v4, WNDR4300, WNDR4300v2, WNDR4500v3, and WNR2000v5.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 1.0.0.57< 1.0.1.20< 1.0.2.40< 1.0.2.52< 1.0.2.92< 1.0.2.94< 1.0.0.50< 1.0.0.50< 1.0.0.62CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- High
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the NETGEAR router modelCheck the device label on the router chassis or log into the web management interface and look for the model number in the router status or settings pageAffected if The model is D6100, R6100, R7800, R9000, WNDR3700v4, WNDR4300, WNDR4300v2, WNDR4500v3, or WNR2000v5
-
Check the installed firmware versionIn the router web interface, navigate to Administration > Firmware Update or Router Status to view the current firmware version. Alternatively, check the firmware file name if you have direct access to the firmware binaryAffected if The firmware version is below the threshold for your model (D6100 < 1.0.0.57, R6100 < 1.0.1.20, R7800 < 1.0.2.40, R9000 < 1.0.2.52, WNDR3700v4 < 1.0.2.92, WNDR4300 < 1.0.2.94 or < 1.0.0.50, WNDR4500v3 < 1.0.0.50, WNR2000v5 < 1.0.0.62)
-
Confirm remote management access is enabledIn the router web interface, check Advanced > Remote Management or Administration > Remote Management to see if remote management is turned onAffected if Remote management is enabled and the router management interface is accessible from untrusted networks, increasing exposure to authenticated attackers
You are affected if your router model matches one of the listed models AND your installed firmware version is below the specified threshold for that model.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor data1.0.0.501.0.0.571.0.0.62
Apply NETGEAR firmware updates to all affected devices: D6100 to 1.0.0.57, R6100 to 1.0.1.20, R7800 to 1.0.2.40, R9000 to 1.0.2.52, WNDR3700v4 to 1.0.2.92, WNDR4300 to 1.0.2.94, WNDR4300v2 to 1.0.0.50, WNDR4500v3 to 1.0.0.50, and WNR2000v5 to 1.0.0.62. Restrict management interface access to trusted users until patching is complete.
- Consultation3.0 h
- Implementation6.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $4,224.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2018-21175 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2018-21175 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data