Bmxnor0200 FirmwareOperating system · Schneider Electric

CVE-2018-7241

CRITICAL · 9.8 CVSS v3.0 Published 2018-04-18
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Hard coded accounts exist in Schneider Electric's Modicon Premium, Modicon Quantum, Modicon M340, and BMXNOR0200 controllers in all versions of the communication modules.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Hardcoded authentication credentials are embedded in the firmware of Schneider Electric Modicon Premium, Modicon Quantum, Modicon M340, and BMXNOR0200 PLC communication modules. Attackers with network access can use these accounts to gain unauthorized administrative access to the controllers.

MitigationRestrict network access to industrial control systems, implement compensating controls such as firewalls and network segmentation, and contact Schneider Electric for patched firmware to replace the hardcoded accounts.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Bmxnor0200 FirmwareOperating system
Affected:all versions
Bmxnor0200h FirmwareOperating system
Affected:all versions
140cpu65150 FirmwareOperating system
Affected:all versions
140cpu31110 FirmwareOperating system
Affected:all versions
140cpu43412u FirmwareOperating system
Affected:all versions
140cpu65160 FirmwareOperating system
Affected:all versions
140cpu65260 FirmwareOperating system
Affected:all versions
140cpu65860 FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify affected PLC models in your environment
    Inventory your industrial control system equipment and identify if any Schneider Electric BMXNOR0200, BMXNOR0200h, or 140cpu* series controllers (140cpu65150, 140cpu31110, 140cpu43412u, 140cpu65160, 140cpu65260, 140cpu65860) are deployed
    Affected if Any of the listed models are present in the environment
  2. Determine firmware version of affected modules
    Access the controller via the appropriate engineering software (Unity Pro, Somachine, or EcoStruxure) and retrieve the firmware version from the module properties or system information
    Affected if The firmware version is any version (all versions are affected)
  3. Verify network accessibility of PLCs
    Check firewall rules, network segmentation, and access control lists to determine if the PLCs are reachable from untrusted networks or the internet
    Affected if The PLCs are directly accessible from networks outside the trusted control system zone
  4. Test for presence of hardcoded accounts
    Attempt to authenticate to the PLC web interface or FTP service using the known hardcoded credentials (if documented in your security advisories) or check firmware configuration files for embedded credential strings
    Affected if Authentication succeeds with any undocumented or hardcoded administrative account
  5. Review authentication logs for unknown admin access
    Examine controller event logs, syslog exports, or management platform logs for successful logins from IP addresses that are not recognized engineering workstations
    Affected if Administrative access events appear from unexpected source addresses

You are affected if any Schneider Electric BMXNOR0200 or 140cpu* PLC modules are present in your environment and are network-accessible to untrusted parties, since the hardcoded credentials exist in all firmware versions.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Restrict network access to industrial control systems, implement compensating controls such as firewalls and network segmentation, and contact Schneider Electric for patched firmware to replace the hardcoded accounts.

Fix this in Bmxnor0200 Firmware Scoped from the published advisory
  • Consultation12.0 h
  • Implementation16.0 h
  • Testing12.0 h
  • Review / QA8.0 h
48.0 hours of engineering $8,520
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $13,632.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2018-7241 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2018-7241 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data