CVE-2019-11946
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA remote credential disclosure vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceA remote credential disclosure vulnerability exists in HPE Intelligent Management Center (IMC) PLAT versions earlier than 7.3 E0506P09, allowing authenticated or unauthenticated remote attackers to potentially obtain sensitive credentials stored within the platform.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 7.3= 7.3CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- None
- Availability
- None
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify HPE IMC PLAT versionAccess the IMC web console or use the system information interface to locate the installed PLAT version number. Typically found under System > System Settings > Version Info or similar administration pages.Affected if The displayed version is earlier than 7.3 E0506P09 or shows exactly version 7.3
-
Confirm exact version stringVerify the full version string including any build or patch level designations (for example, check if it shows E0506P09 or later).Affected if The version does not contain E0506P09 or a later patch designation
-
Assess network exposureDetermine if the IMC management interfaces (typically ports 8080, 8443, or 443) are accessible from untrusted networks or the internet.Affected if IMC management ports are directly exposed to untrusted network segments or the internet
-
Check authentication statusReview whether default credentials remain in use or if anonymous/guest access is enabled on the IMC platform.Affected if Default credentials are active or unauthenticated access to management interfaces is possible
You are affected if your HPE IMC PLAT version is earlier than 7.3 E0506P09 or exactly version 7.3, and the IMC management interface is network-accessible to attackers.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor data7.3
Upgrade HPE IMC PLAT to version 7.3 E0506P09 or later. If immediate upgrade is not possible, restrict network access to the IMC management interfaces and enforce strong authentication mechanisms.
- Consultation4.0 h
- Implementation8.0 h
- Testing8.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,656.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-11946 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-11946 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data