CVE-2019-11948
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedA remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceA remote code execution vulnerability exists in HPE Intelligent Management Center (IMC) PLAT in versions earlier than 7.3 E0506P09. This is a critical network management platform vulnerability that allows attackers to execute arbitrary code remotely, potentially compromising the entire IMC deployment and connected network infrastructure.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 7.3= 7.3CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify HPE IMC installation and versionLocate the HPE Intelligent Management Center installation and determine its version number. This is typically found in the IMC web interface under 'About' or 'System Information', or via command line tools provided with IMC.Affected if The installed version is any version of IMC PLAT earlier than 7.3 E0506P09, including versions < 7.3 and = 7.3
-
Confirm the PLAT component is presentVerify that the IMC PLAT (Platform) component is installed and running. This is the core platform component of HPE IMC that provides the management framework.Affected if The PLAT component is present and the version has not been patched to E0506P09 or later
-
Compare version against affected rangeCompare your installed IMC PLAT version against the known affected versions: any release earlier than 7.3 E0506P09. Version 7.3 with any update earlier than E0506P09 is also affected.Affected if The version is either less than 7.3, equal to 7.3 without the E0506P09 update, or falls within 7.3 but before the E0506P09 patch level
A user is affected if HPE IMC PLAT is installed and the version is any release earlier than 7.3 E0506P09, including all 7.3 versions prior to that specific patch.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor data7.3
Upgrade HPE IMC PLAT to version 7.3 E0506P09 or later to remediate this vulnerability. If immediate patching is not possible, restrict network access to IMC management interfaces and implement additional monitoring.
- Consultation4.0 h
- Implementation4.0 h
- Testing8.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,504.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-11948 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-11948 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data