CVE-2019-11998
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedHPE Superdome Flex Server is vulnerable to multiple remote vulnerabilities via improper input validation of administrator commands. This vulnerability could allow an Administrator to bypass security restrictions and access multiple remote vulnerabilities including information disclosure, or denial of service. HPE has provided firmware updates that address the above vulnerabilities for the HPE Superdome Flex Server starting with firmware version v3.20.186 (not available online) and v3.20.206 (available online). Apply v3.20.206 (4 December 2019) or a newer version to resolve this issue. Please visit HPE Support Center https://support.hpe.com/hpesc/public/home to obtain the updated firmware for your product.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceHPE Superdome Flex Server contains improper input validation vulnerabilities in administrator command handling, allowing authenticated administrators to bypass security restrictions and potentially access information disclosure or cause denial of service conditions.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 3.20.186CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Local
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- None
- Availability
- None
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the HPE Superdome Flex Server firmware versionAccess the server management interface (such as HPE iLO or the system maintenance menu) and retrieve the current firmware version information for the Superdome Flex ServerAffected if The displayed firmware version is lower than 3.20.186
-
Confirm the server modelVerify that the system is specifically an HPE Superdome Flex Server by checking the system inventory or hardware configurationAffected if The system is confirmed to be an HPE Superdome Flex Server and the firmware version is below 3.20.186
-
Verify administrator access to command handlingReview the server configuration to confirm whether administrator command handling features are enabled or accessibleAffected if Administrator command handling is enabled and the firmware version is below 3.20.186
A user is affected if their HPE Superdome Flex Server is running firmware version lower than 3.20.186 and has administrator command handling functionality available.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor data3.20.186
Apply HPE Superdome Flex Server firmware version v3.20.206 (released December 4, 2019) or newer to resolve the improper input validation vulnerabilities.
- Consultation2.0 h
- Implementation4.0 h
- Testing2.0 h
- Review / QA1.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,560.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-11998 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-11998 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data