CVE-2019-14562
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedInteger overflow in DxeImageVerificationHandler() EDK II may allow an authenticated user to potentially enable denial of service via local access.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceInteger overflow vulnerability in DxeImageVerificationHandler() function within EDK II (UEFI firmware development kit). The overflow occurs during image verification processing and can be triggered by an authenticated user with local access, leading to denial of service.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 9.0all versionsCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Local
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- None
- Availability
- High
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Confirm system uses UEFI firmwareCheck for /sys/firmware/efi directory or run 'ls /sys/firmware/efi'Affected if Directory exists, indicating the system uses UEFI firmware and may contain the vulnerable EDK II component
-
Check UEFI firmware versionRun 'sudo dmidecode -s bios-version' or 'sudo dmidecode -t bios' to retrieve the installed firmware versionAffected if The reported firmware version falls within the affected range or is an unpatched EDK II-based firmware (all versions of Tianocore Edk2 are affected)
-
Check for EDK II package on DebianRun 'dpkg -l | grep -i edk2' or 'dpkg -l | grep -i uefi' on Debian 9.0 systemsAffected if The edk2 package is installed, indicating the vulnerable code is present in the firmware
-
Check UEFI vendor informationRun 'sudo dmidecode -s bios-vendor' to identify the firmware vendor and 'sudo dmidecode -s system-manufacturer' for system manufacturerAffected if Vendor uses EDK II as their firmware base and has not released patches for CVE-2019-14562
-
Verify secure boot configurationCheck /sys/firmware/efi/efivars/SecureBoot-* or run 'mokutil --sb-state' to see if secure boot is enabledAffected if Secure boot is disabled, as the vulnerability affects image verification processing in DxeImageVerificationHandler()
A system is affected if it runs UEFI firmware built with EDK II (Tianocore) and the firmware has not been patched, especially on Debian 9.0 systems or any EDK II-based firmware where secure boot is disabled and the attacker has local authenticated access.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply vendor-supplied firmware updates for affected systems using EDK II. Restrict physical and local access to systems to limit exposure to authenticated attackers.
- Consultation4.0 h
- Implementation8.0 h
- Testing6.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,176.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-14562 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-14562 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data