dbcve.org
Mt7620n FirmwareOperating system · Mediatek

CVE-2019-18989

MEDIUM · 5.4 CVSS v3.1 Published 2020-09-30
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
59/100
Remediation priority · Elevated
No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A partial authentication bypass vulnerability exists on Mediatek MT7620N 1.06 devices. The vulnerability allows sending an unencrypted data frame to a WPA2-protected WLAN router where the packet is routed through the network. If successful, a response is sent back as an encrypted frame, which would allow an attacker to discern information or potentially modify data.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

This is a partial authentication bypass in Mediatek MT7620N firmware 1.06 where an attacker can send unencrypted frames to a WPA2-protected router. The router processes and routes these frames, returning encrypted responses, allowing the attacker to infer information or potentially modify data through this relay-like behavior.

MitigationContact Mediatek or the device manufacturer to obtain a firmware update. If unavailable, consider network segmentation or replacing affected devices with updated models.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Mt7620n FirmwareOperating system
Affected:= 1.06

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
Low
Availability
None

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device chipset
    Log into the router admin interface and look for hardware information or chipset details. Alternatively, check the device documentation or product specifications for Mediatek MT7620N mention.
    Affected if The device uses Mediatek MT7620N chipset
  2. Check the firmware version
    Log into the router admin interface and navigate to the firmware or system status page to view the installed firmware version.
    Affected if The installed firmware version is exactly 1.06
  3. Verify WPA2 encryption is enabled
    Log into the router admin interface and check the wireless security settings to confirm WPA2 encryption is in use.
    Affected if WPA2 encryption is enabled on the wireless network

The device is affected if it uses Mediatek MT7620N chipset with firmware version 1.06 and has WPA2 encryption enabled.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Contact Mediatek or the device manufacturer to obtain a firmware update. If unavailable, consider network segmentation or replacing affected devices with updated models.

Fix this in Mt7620n Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Testing2.0 h
  • Review / QA1.0 h
5.0 hours of engineering $880
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,408.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2019-18989 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2019-18989 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data