CVE-2019-7279
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedOptergy Proton/Enterprise devices have Hard-coded Credentials.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceOptergy Proton and Enterprise building management system devices contain hard-coded credentials embedded in the firmware or configuration. These credentials can be extracted or guessed, allowing unauthorized attackers to gain administrative access to the affected devices.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data<= 2.3.0a<= 2.3.0aCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- Low
- Integrity
- Low
- Availability
- Low
CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify Optergy product and versionAccess the device management interface or check system information to determine if the device is running Optergy Proton or Enterprise and note the firmware/software version numberAffected if The installed version is Optergy Proton or Enterprise and the version is 2.3.0a or lower
-
Verify default administrative accountsCheck the list of user accounts configured in the system, specifically looking for default administrative usernames that ship with the productAffected if Default administrative accounts (such as 'admin' or other factory-default accounts) are present and active on the system
-
Test for hard-coded credentialsAttempt to authenticate using known default credential pairs or check configuration files for hard-coded password stringsAffected if Authentication succeeds with any default or hard-coded credential that should have been changed post-deployment
-
Review credential configurationInspect the authentication configuration or user management settings to determine if passwords are stored in plain text or use weak/default valuesAffected if Credentials are set to default values or hard-coded passwords are found in configuration
The environment is affected if the installed Optergy Proton or Enterprise version is 2.3.0a or lower and any default or hard-coded administrative credentials are still active on the system.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataReplace all default/hard-coded credentials with unique, strong credentials per device, apply any available vendor firmware updates that remove hard-coded accounts, and implement a credential management policy to prevent future hard-coded credentials in deployed systems.
- Consultation4.0 h
- Implementation8.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-7279 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-7279 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data