CVE-2019-7360
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedAn exploitable use-after-free vulnerability in the DXF-parsing functionality in Autodesk Advance Steel 2018, Autodesk AutoCAD 2018, Autodesk AutoCAD Architecture 2018, Autodesk AutoCAD Electrical 2018, Autodesk AutoCAD Map 3D 2018, Autodesk AutoCAD Mechanical 2018, Autodesk AutoCAD MEP 2018, Autodesk AutoCAD P&ID 2018, Autodesk AutoCAD Plant 3D 2018, Autodesk AutoCAD LT 2018, and Autodesk Civil 3D 2018. A specially crafted DXF file may trigger a use-after-free, resulting in code execution.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceA use-after-free vulnerability exists in the DXF file parsing functionality of multiple Autodesk products (AutoCAD variants, Advance Steel, and Civil 3D 2018). When parsing a specially crafted malicious DXF file, the software improperly manages memory, leading to access of freed memory and potential code execution.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 2018= 2018= 2018= 2018= 2018= 2018= 2018= 2018CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Local
- Complexity
- Low
- Privileges
- None
- User interaction
- Required
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.0/AV:L/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify installed Autodesk productOpen the application and check Help > About, or look in Programs and Features for the installed Autodesk product name and version numberAffected if The product matches one of the affected products (AutoCAD, AutoCAD Architecture, AutoCAD Electrical, AutoCAD LT, AutoCAD Map 3D, AutoCAD Mechanical, AutoCAD MEP, Advance Steel, or Civil 3D) and the version is 2018
-
Confirm exact version numberIn the application, go to Help > About Autodesk and note the full version string (for example, look for '2018' in the version information)Affected if The version is exactly 2018 (any 2018.x.x release)
-
Verify DXF file handling capabilityTry to open or import a DXF file in the installed application - attempt to use File > Open or File > Import with a .dxf file extensionAffected if DXF file opening or importing functionality is available and operational in the product
-
Assess exposure to untrusted DXF filesReview whether the system or users in your environment commonly open DXF files from external or untrusted sources, or check email/file downloads for potential malicious DXF attachmentsAffected if Users have the ability to open or import DXF files from untrusted or unknown sources
You are affected if you have any of the listed Autodesk 2018 products installed and users can open or import DXF files, since the vulnerability triggers during parsing of a malicious DXF file.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataDo not open untrusted or unverified DXF files. Apply the vendor patch/update from Autodesk to address this vulnerability.
- Consultation2.0 h
- Implementation4.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,088.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2019-7360 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2019-7360 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data