CVE-2020-24514
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedImproper authentication in some Intel(R) RealSense(TM) IDs may allow an unauthenticated user to potentially enable escalation of privilege via physical access.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceIntel RealSense ID devices have improper authentication that allows an unauthenticated user with physical access to potentially escalate privileges. This appears to be an authentication bypass or insufficient access control in the facial recognition authentication system.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE dataall versionsall versionsCVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Physical
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:P/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify Intel RealSense ID device modelLocate the device physically or check asset inventory/documentation. Look for model number F450 or F455 printed on the device label or packaging.Affected if Device model is Intel RealSense ID F450 or F455 (all firmware versions are affected)
-
Confirm facial authentication feature is configuredCheck device settings or management interface to determine if the facial recognition authentication system is enabled. Review device configuration profiles or admin panel for authentication method settings.Affected if Facial authentication is enabled and the device is actively using the facial recognition system
-
Assess physical security of device locationInspect the physical location where the RealSense ID device is installed. Determine if the device is in a secured area with controlled access or in a publicly/physically accessible location.Affected if Device is installed in a location with untrusted physical access (e.g., lobby, reception, unattended area)
-
Verify firmware versionConnect to device via USB/serial or access device management interface to query current firmware version.Affected if Firmware version is any version (CVE-2020-24514 affects all versions of F450 and F455)
Environment is affected if Intel RealSense ID F450 or F455 devices with facial authentication enabled are installed in physically accessible locations.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataSince physical access is required, ensure devices are in physically secure locations; apply any available firmware updates from Intel; consider additional physical security controls like tamper-evident seals.
- Consultation2.0 h
- Implementation4.0 h
- Testing3.0 h
- Review / QA1.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,800.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2020-24514 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2020-24514 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data