3.0t Signa Hdxt FirmwareOperating system · Gehealthcare

CVE-2020-25179

CRITICAL · 9.8 CVSS v3.1 Published 2020-12-14
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
GE Healthcare Imaging and Ultrasound Products may allow specific credentials to be exposed during transport over the network.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

GE Healthcare Imaging and Ultrasound Products contain a vulnerability where specific credentials are exposed during network transport, likely due to transmission in cleartext or insecure handling. This allows attackers with network access to intercept credentials and gain unauthorized access to affected devices.

MitigationEnable encryption for all network communications (TLS/HTTPS), change default credentials immediately, implement network segmentation to isolate medical devices, and contact GE Healthcare for device-specific patches or firmware updates.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
3.0t Signa Hdxt FirmwareOperating system
Affected:all versions
3.0t Signa Hd 16 FirmwareOperating system
Affected:all versions
3.0t Signa Hd 23 FirmwareOperating system
Affected:all versions
1.5t Brivo Mr355 FirmwareOperating system
Affected:all versions
Optima Mr360 FirmwareOperating system
Affected:all versions
Signa Hdi 1.5t FirmwareOperating system
Affected:all versions
Signa Vibrant FirmwareOperating system
Affected:all versions
Logiq 5 Bt03 FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model and firmware version
    Access the device console or management interface and run the system information command (typically 'system info' or through the service menu) to confirm the exact model and current firmware version
    Affected if Device model matches any of: Signa Hdxt, Signa Hd 16, Signa Hd 23, Brivo Mr355, Optima Mr360, Signa Hdi 1.5t, Signa Vibrant, or Logiq 5 Bt03 - all firmware versions are affected
  2. Verify network encryption status
    Access the device network configuration settings through the service/admin interface and check whether TLS, HTTPS, or any encrypted network protocol is enabled for remote access and data transmission
    Affected if Network encryption (TLS/HTTPS) is disabled or not configured - credentials would be transmitted in cleartext
  3. Capture and inspect network traffic
    Use a network packet capture tool (such as Wireshark or tcpdump) on the network segment connected to the device and monitor traffic during authentication or remote access sessions
    Affected if Credentials (usernames/passwords) are visible in plain text within captured network packets
  4. Check for default credentials in use
    Review the device authentication configuration and compare against known default credential sets for GE Healthcare imaging devices (consult device documentation for default login patterns)
    Affected if Default vendor credentials remain active or no credential policy is enforced

The environment is affected if any of the listed GE Healthcare imaging/ultrasound device models are present on the network AND network traffic inspection reveals unencrypted credential transmission OR default credentials are still in use.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Enable encryption for all network communications (TLS/HTTPS), change default credentials immediately, implement network segmentation to isolate medical devices, and contact GE Healthcare for device-specific patches or firmware updates.

Fix this in 3.0t Signa Hdxt Firmware Scoped from the published advisory
  • Consultation8.0 h
  • Implementation16.0 h
  • Testing12.0 h
  • Review / QA8.0 h
44.0 hours of engineering $7,720
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $12,352.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2020-25179 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2020-25179 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data