Cbr40 FirmwareOperating system · Netgear

CVE-2020-26904

HIGH · 8.8 CVSS v3.1 Published 2020-10-09
Fix available
A fix is available. Upgrade to 2.5.0.10 / 3.2.10.11 or later.
See remediation →
93/100
Remediation priority · Urgent
No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Certain NETGEAR devices are affected by disclosure of administrative credentials. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.10.11, RBR850 before 3.2.10.11, and RBS850 before 3.2.10.11.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Certain NETGEAR Orbi mesh WiFi systems and CBR40 cable modem/router devices contain a vulnerability allowing disclosure of administrative credentials. The specific disclosure mechanism is not detailed, but the vulnerability enables attackers to obtain username/password combinations for device administration. This grants full administrative access to the affected devices, potentially allowing network reconfiguration, traffic inspection, or further network compromise.

MitigationApply the available firmware updates: CBR40 to version 2.5.0.10, RBK752/RBR750/RBS750 to version 3.2.15.25, and RBK852/RBR850/RBS850 to version 3.2.10.11. If immediate patching is not feasible, restrict administrative interface access to trusted networks only and monitor for unauthorized access attempts.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Cbr40 FirmwareOperating system
Affected:< 2.5.0.10
Rbk752 FirmwareOperating system
Affected:< 3.2.15.25
Rbr750 FirmwareOperating system
Affected:< 3.2.15.25
Rbs750 FirmwareOperating system
Affected:< 3.2.15.25
Rbk852 FirmwareOperating system
Affected:< 3.2.10.11
Rbr850 FirmwareOperating system
Affected:< 3.2.10.11
Rbs850 FirmwareOperating system
Affected:< 3.2.10.11

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the NETGEAR device model
    Locate the device label on the physical device or access the web administration interface and navigate to the Status or Device Information page to determine the exact model number.
    Affected if The model is one of: CBR40, RBK752, RBR750, RBS750, RBK852, RBR850, or RBS850.
  2. Check the installed firmware version
    In the web administration interface, go to Administration > Firmware Update or a similar Status page to view the current firmware version installed on the device.
    Affected if The firmware version cannot be determined or is not displayed.
  3. Compare firmware version against CVE thresholds
    Match the installed firmware version to the affected version ranges: CBR40 versions below 2.5.0.10, RBK752/RBR750/RBS750 versions below 3.2.15.25, and RBK852/RBR850/RBS850 versions below 3.2.10.11.
    Affected if The installed version is lower than the fixed version for that specific model.
  4. Verify administrative access exposure
    If the device is reachable from untrusted networks, confirm whether the web administration interface is exposed to the internet or accessible without VPN, as this would allow the credential disclosure to be exploited remotely.
    Affected if The administrative interface is accessible from untrusted networks.

The device is affected if it is a CBR40, RBK752, RBR750, RBS750, RBK852, RBR850, or RBS850 model running firmware below the fixed version (2.5.0.10, 3.2.15.25, or 3.2.10.11 respectively) and has its administrative interface exposed to untrusted networks.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to 2.5.0.10 / 3.2.10.11 / 3.2.15.25 or later
Fixed in 2.5.0.103.2.10.113.2.15.25
Interim mitigation

Apply the available firmware updates: CBR40 to version 2.5.0.10, RBK752/RBR750/RBS750 to version 3.2.15.25, and RBK852/RBR850/RBS850 to version 3.2.10.11. If immediate patching is not feasible, restrict administrative interface access to trusted networks only and monitor for unauthorized access attempts.

Fix this in Cbr40 Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,200
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2020-26904 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2020-26904 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data