Aqt1000 FirmwareOperating system · Qualcomm

CVE-2020-3664

MEDIUM · 6.0 CVSS v3.1 Published 2021-02-22
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
62/100
Remediation priority · Elevated
Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Out of bound read access in hypervisor due to an invalid read access attempt by passing invalid addresses in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Out-of-bounds read vulnerability in the hypervisor component of Qualcomm Snapdragon chips. The issue occurs when invalid addresses are passed to the hypervisor, allowing unauthorized memory reads outside intended boundaries.

MitigationApply vendor-supplied firmware/hypervisor updates from Qualcomm and device manufacturers. This is a firmware-level fix that must be distributed through device update mechanisms.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Aqt1000 FirmwareOperating system
Affected:all versions
Ar8031 FirmwareOperating system
Affected:all versions
Ar8035 FirmwareOperating system
Affected:all versions
Csr8811 FirmwareOperating system
Affected:all versions
Csra6620 FirmwareOperating system
Affected:all versions
Csra6640 FirmwareOperating system
Affected:all versions
Csrb31024 FirmwareOperating system
Affected:all versions
Fsm10055 FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Local
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
None
Availability
High

CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify installed Qualcomm firmware products
    Examine the device firmware or system information to determine which Qualcomm firmware components are present. For embedded devices, this may require accessing /proc, /sys, bootloader info, or device management interfaces. Look for modules or firmware files matching Aqt1000, Ar8031, Ar8035, Csr8811, Csra6620, Csra6640, Csrb31024, or Fsm10055.
    Affected if Any of the listed Qualcomm firmware products (Aqt1000, Ar8031, Ar8035, Csr8811, Csra6620, Csra6640, Csrb31024, Fsm10055) are present on the device, regardless of version, since all versions are affected.
  2. Verify hypervisor component status
    Determine whether the Qualcomm hypervisor component is active or accessible on the system. This may involve checking running processes, loaded kernel modules, or hypervisor-specific status registers. Consult device-specific documentation for hypervisor status indicators.
    Affected if The Qualcomm hypervisor component is enabled and accessible on the system, as this is required for the out-of-bounds read to occur.
  3. Check for abnormal memory access patterns
    Review system logs, hypervisor logs, or memory access audit trails for evidence of unauthorized memory read attempts using invalid addresses. Look for error messages related to out-of-bounds memory access, memory protection faults, or hypervisor errors involving address validation failures.
    Affected if Logs or audit records show memory read operations that attempted to access addresses outside intended boundaries through the hypervisor, which would indicate active exploitation or attempted exploitation of this vulnerability.

A system is affected if it contains any of the listed Qualcomm firmware products (Aqt1000, Ar8031, Ar8035, Csr8811, Csra6620, Csra6640, Csrb31024, Fsm10055) with the hypervisor component enabled, since all versions of these products contain the vulnerability.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply vendor-supplied firmware/hypervisor updates from Qualcomm and device manufacturers. This is a firmware-level fix that must be distributed through device update mechanisms.

Fix this in Aqt1000 Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing12.0 h
  • Review / QA6.0 h
30.0 hours of engineering $5,120
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $8,192.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2020-3664 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2020-3664 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data