Easergy T300 FirmwareOperating system · Schneider Electric

CVE-2020-7505

HIGH · 7.2 CVSS v3.1 Published 2020-06-16
Fix available
A fix is available. Upgrade to after 1.5.2 or later.
See remediation →
78/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A CWE-494 Download of Code Without Integrity Check vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to inject data with dangerous content into the firmware and execute arbitrary code on the system.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

The Easergy T300 firmware update mechanism downloads code without verifying integrity (no cryptographic checksum or signature validation), allowing attackers to inject malicious firmware that executes with system privileges.

MitigationUpgrade firmware to version newer than 1.5.2; until then, protect the update channel via network segmentation and TLS to prevent man-in-the-middle injection of malicious firmware.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Easergy T300 FirmwareOperating system
Affected:<= 1.5.2

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device model
    Locate the Schneider Electric Easergy T300 device or its management interface and confirm the product name and model number.
    Affected if The device is not an Easergy T300 unit.
  2. Determine the installed firmware version
    Access the device web interface, CLI, or management console and locate the firmware version information, typically found in the System Info, About, or Firmware section.
    Affected if Unable to retrieve the firmware version from the device.
  3. Compare version against affected range
    Compare the installed firmware version number to the affected range: any version 1.5.2 or lower is vulnerable.
    Affected if Firmware version is 1.5.2 or lower.
  4. Verify firmware update mechanism accessibility
    Check if the firmware update functionality is accessible on the device, typically via the web interface upload feature or update service port.
    Affected if Firmware update feature is accessible and version is <= 1.5.2.

A user is affected if their Easergy T300 device runs firmware version 1.5.2 or lower and the firmware update mechanism is accessible.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Upgrade available Upgrade to a release after 1.5.2
Interim mitigation

Upgrade firmware to version newer than 1.5.2; until then, protect the update channel via network segmentation and TLS to prevent man-in-the-middle injection of malicious firmware.

Fix this in Easergy T300 Firmware Scoped from the published advisory
  • Consultation6.0 h
  • Implementation20.0 h
  • Testing10.0 h
  • Review / QA6.0 h
42.0 hours of engineering $7,380
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $11,808.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2020-7505 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2020-7505 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data