Ethernet Controller V710 At2 FirmwareOperating system · Intel

CVE-2021-0200

MEDIUM · 6.7 CVSS v3.1 Published 2021-11-17
Fix available
A fix is available. Upgrade to 8.2 or later.
See remediation →
69/100
Remediation priority · Elevated
Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Out-of-bounds write in the firmware for Intel(R) Ethernet 700 Series Controllers before version 8.2 may allow a privileged user to potentially enable an escalation of privilege via local access.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

An out-of-bounds write vulnerability exists in the firmware of Intel Ethernet 700 Series Controllers versions prior to 8.2. This memory corruption flaw allows a privileged local user to potentially escalate privileges by writing beyond allocated buffer boundaries in the firmware.

MitigationUpdate Intel Ethernet 700 Series Controllers firmware to version 8.2 or later. Apply updates during a planned maintenance window following vendor firmware deployment procedures.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Ethernet Controller V710 At2 FirmwareOperating system
Affected:< 8.2
Ethernet Controller X710 Tm4 FirmwareOperating system
Affected:< 8.2
Ethernet Controller X710 At2 FirmwareOperating system
Affected:< 8.2
Ethernet Controller Xxv710 Am2 FirmwareOperating system
Affected:< 8.2
Ethernet Controller Xxv710 Am1 FirmwareOperating system
Affected:< 8.2
Ethernet Controller X710 Am2 FirmwareOperating system
Affected:< 8.2
Ethernet Controller Xl710 Am1 FirmwareOperating system
Affected:< 8.2
Ethernet Controller Xl710 Am2 FirmwareOperating system
Affected:< 8.2

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Local
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify Intel Ethernet 700 Series Controller hardware
    Run 'lspci | grep -i ethernet' or check system network adapter inventory to locate Intel Ethernet Controller models. Look for V710, X710, Xxv710, or Xl710 designations.
    Affected if The system does not have any of the listed Intel Ethernet 700 Series Controllers (V710, X710, Xxv710, Xl710) - if so, not affected.
  2. Determine firmware version of the Intel Ethernet 700 Series adapter
    Use 'ethtool -i <interface>' (replace <interface> with the network interface name, e.g., eth0) to query firmware version. Alternatively, use 'lspci -vv -s <device> | grep -i firmware' or Intel's specific diagnostic tools.
    Affected if Unable to retrieve firmware version for the Intel Ethernet 700 Series adapter.
  3. Compare firmware version against vulnerable range
    Review the firmware version output from ethtool or lspci. Check if the version number (before any build identifiers) is less than 8.2 (e.g., 8.0, 7.5, 7.0, etc.).
    Affected if Firmware version is less than 8.2 (for example: 8.1, 8.0, 7.5, 7.0, etc.) - the system is potentially affected.
  4. Verify running as privileged local user context
    This is a local privilege escalation flaw. Confirm whether untrusted local users have privileged access to the system where they could trigger the vulnerable code path.
    Affected if Untrusted local users have privileged access to the system - combined with vulnerable firmware version, they could potentially exploit this flaw.

The system is affected only if it has an Intel Ethernet 700 Series Controller (V710, X710, Xxv710, or Xl710) running firmware version prior to 8.2, and an untrusted local user could interact with the network adapter firmware.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 8.2 or later
Fixed in 8.2
Interim mitigation

Update Intel Ethernet 700 Series Controllers firmware to version 8.2 or later. Apply updates during a planned maintenance window following vendor firmware deployment procedures.

Recommended fix High confidence

Intel Ethernet 700 Series Controllers Firmware version 8.2

  1. Identify the specific Intel Ethernet 700 Series controller model (V710, X710, Xxv710, or Xl710) in your system
  2. Navigate to Intel's support website or your system vendor's download page to obtain the firmware version 8.2 or later for your specific controller model
  3. Download the appropriate firmware update package (typically includes .bin or .fd file)
  4. Follow your system vendor's recommended firmware update procedure - this usually involves using Intel Ethernet Firmware Recovery Tool, EFI utility, or vendor-specific update tool
  5. Apply the firmware update to the Ethernet controller
  6. Reboot the system as required by the update process
  7. Verify the installed firmware version is 8.2 or later using tools like 'ethtool -i' or the vendor's management interface
Caveat Review vendor release notes for any known issues; firmware updates may require system downtime and should be tested in non-production environments first

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Ethernet Controller V710 At2 Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation6.0 h
  • Testing4.0 h
  • Review / QA2.0 h
16.0 hours of engineering $2,840
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $4,544.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2021-0200 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2021-0200 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data