Iac Ast2500a FirmwareOperating system · Lannerinc

CVE-2021-26731

CRITICAL · 9.8 CVSS v3.1 Published 2022-10-24
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Command injection and multiple stack-based buffer overflows vulnerabilities in the modifyUserb_func function of spx_restservice allow an authenticated attacker to execute arbitrary code with the same privileges as the server user (root). This issue affects: Lanner Inc IAC-AST2500A standard firmware version 1.10.0.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

Command injection and multiple stack-based buffer overflows in the modifyUserb_func function of spx_restservice allow authenticated attackers to execute arbitrary code with root privileges on Lanner IAC-AST2500A firmware version 1.10.0.

MitigationApply vendor firmware patch when available; restrict network access to the REST service and disable it if not required; consider network segmentation for affected devices.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Iac Ast2500a FirmwareOperating system
Affected:= 1.10.0

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model
    Check if the hardware is Lanner IAC-AST2500A by reviewing system information, device label, or BMC web interface
    Affected if Device is not Lanner IAC-AST2500A (unaffected)
  2. Determine firmware version
    Access BMC web interface or use IPMI command to retrieve firmware version. Compare against the affected version 1.10.0
    Affected if Firmware version is exactly 1.10.0
  3. Verify spx_restservice status
    Check if the spx_restservice is running or enabled on the device through BMC management interface or service enumeration
    Affected if spx_restservice is enabled and running
  4. Assess REST service accessibility
    Determine if the REST service is accessible over network by checking listening ports and network exposure
    Affected if REST service is network-accessible with authentication enabled

Device is affected only if it is an Lanner IAC-AST2500A with firmware version 1.10.0, the spx_restservice is running, and the REST service is network-accessible with valid authentication configured.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply vendor firmware patch when available; restrict network access to the REST service and disable it if not required; consider network segmentation for affected devices.

Fix this in Iac Ast2500a Firmware Scoped from the published advisory
  • Consultation3.0 h
  • Implementation2.0 h
  • Testing4.0 h
  • Review / QA2.0 h
11.0 hours of engineering $1,920
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,072.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2021-26731 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2021-26731 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data