Development SystemApplication · Codesys

CVE-2022-31805

HIGH · 7.5 CVSS v3.1 Published 2022-06-24
Fix available
A fix is available. Upgrade to 2.3.9.38 / 2.3.9.69 or later.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
In the CODESYS Development System multiple components in multiple versions transmit the passwords for the communication between clients and servers unprotected.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

The CODESYS Development System transmits client-server authentication passwords in cleartext (unencrypted), allowing network eavesdropping to capture credentials. This affects multiple components across multiple versions of the development environment.

MitigationApply vendor patches from CODESYS when available; until then, isolate affected systems on dedicated network segments and use VPN tunnels for all client-server communications involving CODESYS.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Development SystemApplication
Affected:< 2.3.9.69
Edge GatewayWeb browser
Affected:< 3.5.18.30
GatewayApplication
Affected:< 2.3.9.38
Hmi SlApplication
Affected:< 3.5.18.30
Opc ServerApplication
Affected:< 3.5.18.30
PlchandlerApplication
Affected:< 3.5.18.30
PlcwinntApplication
Affected:< 2.4.7.57
Runtime ToolkitApplication
Affected:< 2.4.7.57

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
None
Availability
None

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify installed CODESYS components
    Review installed programs or check Program Files for CODESYS directories (typically C:\Program Files\CODESYS or C:\Program Files (x86)\CODESYS). Look for component names: Development System, Edge Gateway, Gateway, Hmi Sl, Opc Server, Plchandler, Plcwinnt, Runtime Toolkit.
    Affected if Any CODESYS component from the affected product list is installed on the system.
  2. Check CODESYS Development System version
    Open CODESYS Development System, go to Help > About, or locate the file Cv3Core.dll and check its version property. Compare the version number against 2.3.9.69.
    Affected if Version is lower than 2.3.9.69.
  3. Check CODESYS Gateway version
    Locate the Gateway executable (Gateway.exe or similar) in the installation directory. Right-click the file, select Properties, and check the File Version. Compare against 2.3.9.38.
    Affected if Version is lower than 2.3.9.38.
  4. Check CODESYS Edge Gateway, Hmi Sl, Opc Server, and Plchandler versions
    Find the respective executable files in their installation folders (typically named after each component). Check the File Version property of each executable. Compare each against 3.5.18.30.
    Affected if Any of these components have versions lower than 3.5.18.30.
  5. Check CODESYS Plcwinnt and Runtime Toolkit versions
    Locate Plcwinnt.exe or Runtime Toolkit binaries in the installation directory. Check the File Version property. Compare against 2.4.7.57.
    Affected if Version is lower than 2.4.7.57.
  6. Verify if affected components are used for client-server communication
    Review CODESYS project configurations and network settings. Determine whether the affected components are configured to communicate with remote clients or servers over the network (not isolated local-only operation).
    Affected if The vulnerable component is configured for network communication with remote systems.

A system is affected if any CODESYS component from the affected product list is installed with a version below the specified threshold AND the component handles client-server network communication.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 2.3.9.38 / 2.3.9.69 / 2.4.7.57 or later
Fixed in 2.3.9.382.3.9.692.4.7.57
Interim mitigation

Apply vendor patches from CODESYS when available; until then, isolate affected systems on dedicated network segments and use VPN tunnels for all client-server communications involving CODESYS.

Recommended fix Moderate confidence

Upgrade to fixed versions: Development System >=2.3.9.69, Edge Gateway >=3.5.18.30, Gateway >=2.3.9.38, Hmi Sl >=3.5.18.30, Opc Server >=3.5.18.30, Plchandler >=3.5.18.30, Plcwinnt >=2.4.7.57, Runtime Toolkit >=2.4.7.57

  1. 1. Identify all installed CODESYS products from the affected list: Development System, Edge Gateway, Gateway, Hmi Sl, Opc Server, Plchandler, Plcwinnt, Runtime Toolkit
  2. 2. Check current installed versions of each product
  3. 3. For each affected product, download and install the fixed version: Development System version 2.3.9.69 or later, Edge Gateway version 3.5.18.30 or later, Gateway version 2.3.9.38 or later, Hmi Sl version 3.5.18.30 or later, Opc Server version 3.5.18.30 or later, Plchandler version 3.5.18.30 or later, Plcwinnt version 2.4.7.57 or later, Runtime Toolkit version 2.4.7.57 or later
  4. 4. Obtain the updates from the official source: customers.codesys.com
  5. 5. After upgrading, verify that client-server communications now use protected password transmission
  6. 6. Test all affected CODESYS applications to ensure normal functionality after the update
Caveat Review release notes for each product version to check for any compatibility or feature changes that may affect existing projects

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Development System Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,200
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2022-31805 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2022-31805 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data