Aqt1000 FirmwareOperating system · Qualcomm

CVE-2022-33237

HIGH · 7.5 CVSS v3.1 Published 2022-11-15
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
84/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Transient DOS due to buffer over-read in WLAN firmware while processing PPE threshold. in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

A buffer over-read vulnerability in Qualcomm Snapdragon WLAN firmware allows an attacker to cause a transient Denial of Service by sending specially crafted packets that trigger the over-read while processing PPE (likely Power Planning Element) threshold data. The vulnerability resides in the firmware layer, not the host operating system.

MitigationApply firmware updates provided by the device OEM that address this vulnerability in the Snapdragon WLAN component. Until patches are available, network segmentation may limit exposure to unauthenticated WLAN attackers.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Aqt1000 FirmwareOperating system
Affected:all versions
Ar8031 FirmwareOperating system
Affected:all versions
Ar8035 FirmwareOperating system
Affected:all versions
Ar9380 FirmwareOperating system
Affected:all versions
Csr8811 FirmwareOperating system
Affected:all versions
Csra6620 FirmwareOperating system
Affected:all versions
Csra6640 FirmwareOperating system
Affected:all versions
Csrb31024 FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
None
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify Qualcomm WLAN hardware in use
    Examine network adapters, WiFi cards, or embedded wireless modules to determine if they contain any of the affected Qualcomm chip families: Aqt1000, Ar8031, Ar8035, Ar9380, Csr8811, Csra6620, Csra6640, or Csrb31024. This can be done via lspci, lsusb, device datasheets, or hardware inspection.
    Affected if Any device using one of these specific Qualcomm WLAN chip families is potentially affected since all firmware versions are vulnerable.
  2. Determine firmware version of the WLAN chip
    Access the device management interface, diagnostic logs, or firmware dump utility provided by the device OEM to retrieve the current WLAN firmware version. For some devices, this may be visible in boot logs, /proc filesystem, or vendor-specific management tools.
    Affected if The installed firmware version corresponds to any of the listed affected products, regardless of version number, as all versions are vulnerable.
  3. Verify if PPE threshold processing is enabled
    Inspect the WLAN firmware configuration or device settings to determine if processing of PPE (Power Planning Element) threshold data is active. This may require access to advanced diagnostic modes or firmware debug interfaces.
    Affected if The WLAN interface has PPE threshold processing capability enabled and is processing threshold data, which is the trigger condition for the buffer over-read.
  4. Assess network exposure of the WLAN interface
    Evaluate whether the affected WLAN interface is directly accessible to unauthenticated attackers. Check if the interface is in bridge mode, monitor mode, or exposed to untrusted network segments.
    Affected if The vulnerable WLAN interface is network-accessible to untrusted users who could send specially crafted packets to trigger the buffer over-read.

You are affected if your environment contains any device running one of the listed Qualcomm WLAN firmware variants, as all versions are vulnerable and the attack vector involves network-accessible WLAN interfaces processing PPE threshold data.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply firmware updates provided by the device OEM that address this vulnerability in the Snapdragon WLAN component. Until patches are available, network segmentation may limit exposure to unauthenticated WLAN attackers.

Fix this in Aqt1000 Firmware Scoped from the published advisory
  • Consultation8.0 h
  • Implementation16.0 h
  • Testing12.0 h
  • Review / QA8.0 h
44.0 hours of engineering $7,720
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $12,352.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2022-33237 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2022-33237 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data