C7800 FirmwareOperating system · Netgear

CVE-2022-41545

MEDIUM · 6.4 CVSS v3.1 Published 2025-02-18
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
66/100
Remediation priority · Elevated
Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
The administrative web interface of a Netgear C7800 Router running firmware version 6.01.07 (and possibly others) authenticates users via basic authentication, with an HTTP header containing a base64 value of the plaintext username and password. Because the web server also does not utilize transport security by default, this renders the administrative credentials vulnerable to eavesdropping by an adversary during every authenticated request made by a client to the router over a WLAN, or a LAN, should the adversary be able to perform a man-in-the-middle attack.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

The Netgear C7800 router's administrative web interface uses HTTP Basic Authentication, transmitting base64-encoded username and password in plaintext HTTP headers without TLS encryption. This allows network adversaries to intercept credentials via passive eavesdropping on WLAN/LAN or through man-in-the-middle attacks.

MitigationEnable HTTPS/TLS transport security for the router's administrative web interface to encrypt all authentication credentials in transit. If HTTPS is not available, access the admin interface only over trusted, isolated networks.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
C7800 FirmwareOperating system
Affected:= 6.01.07

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
High
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:A/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the router model
    Check the device label or web interface for the model number to confirm it is a Netgear C7800
    Affected if The device is a Netgear C7800 router
  2. Check the firmware version
    Access the router's administrative web interface and navigate to the Firmware Update or Administration page to view the installed firmware version
    Affected if The installed firmware version is 6.01.07
  3. Verify the protocol used for admin access
    Attempt to access the router admin interface using HTTP (port 80) rather than HTTPS. Observe whether the connection is established without redirect or TLS negotiation
    Affected if The admin interface is accessible over plain HTTP (port 80) without being redirected to HTTPS
  4. Confirm TLS/HTTPS is unavailable for admin interface
    Try accessing the admin interface with https:// prefix and port 443. Check if HTTPS is rejected, fails to connect, or is not supported
    Affected if HTTPS is not available or not enforced for the administrative web interface, allowing plaintext HTTP Basic Authentication to be used

You are affected if you have a Netgear C7800 router running firmware 6.01.07 and access the administrative interface over HTTP instead of HTTPS, exposing credentials in plaintext.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Enable HTTPS/TLS transport security for the router's administrative web interface to encrypt all authentication credentials in transit. If HTTPS is not available, access the admin interface only over trusted, isolated networks.

Recommended fix Moderate confidence

Latest available C7800 firmware version from Netgear support (check for versions newer than 6.01.07)

  1. 1. Visit the official Netgear support website at www.netgear.com/support/
  2. 2. Enter "C7800" in the product search or browse to the C7800 product page
  3. 3. Navigate to the Downloads or Firmware section
  4. 4. Download the latest available firmware version for the C7800 router
  5. 5. Access the router's administrative web interface by entering the router's IP address in a web browser
  6. 6. Navigate to the Administration or Advanced settings section
  7. 7. Select the Firmware Update option
  8. 8. Upload and apply the downloaded firmware file
Caveat Firmware updates may reset router configuration to defaults; backup current settings before updating if possible

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in C7800 Firmware Scoped from the published advisory
  • Consultation2.0 h
  • Implementation2.0 h
  • Testing1.0 h
  • Review / QA1.0 h
6.0 hours of engineering $1,090
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,744.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2022-41545 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2022-41545 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data