CVE-2022-4779
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedStreamX applications from versions 6.02.01 to 6.04.34 are affected by a logic bug that allows to bypass the implemented authentication scheme. StreamX applications using StreamView HTML component with the public web server feature activated are affected.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceStreamX versions 6.02.01-6.04.34 contain a logic bug in the authentication implementation that can be bypassed. The vulnerability is triggered when using the StreamView HTML component with the public web server feature enabled, allowing unauthenticated attackers to access protected resources.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data>= 6.02.01, <= 6.04.34CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Determine installed StreamX versionLocate the StreamX application version information, typically found in the application header, about page, configuration file, or installer metadata. Common locations include the admin dashboard, version.info file, or system information panel.Affected if The installed version is >= 6.02.01 and <= 6.04.34
-
Identify StreamView HTML component usageInspect the StreamX application configuration or deployment to determine if the StreamView HTML component is actively deployed or referenced. This may appear in the component library, application modules list, or published web resources.Affected if StreamView HTML component is present in the deployment
-
Verify public web server feature statusExamine the StreamX server configuration settings, typically found in the web server settings, network configuration, or security settings panel. Look for a configuration option enabling public or unauthenticated web access.Affected if Public web server feature is enabled or set to allow unauthenticated access
-
Confirm authentication boundaryReview the StreamView HTML component's authentication requirements in the application security configuration or component-specific settings. Check whether protected resources are configured to be accessible without authentication.Affected if Protected resources via StreamView HTML are accessible without authentication when public web server is active
You are affected if your StreamX version is between 6.02.01 and 6.04.34, the StreamView HTML component is deployed, and the public web server feature is enabled, allowing unauthenticated access to protected resources.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataDisable the public web server feature in StreamX applications using StreamView HTML, or upgrade to a patched version once available. Consider implementing additional authentication layers such as VPN or IP restrictions for public-facing deployments.
- Consultation8.0 h
- Implementation16.0 h
- Testing12.0 h
- Review / QA4.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $11,200.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2022-4779 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2022-4779 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data