CVE-2023-26298
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedPrevious versions of HP Device Manager (prior to HPDM 5.0.10) could potentially allow command injection and/or elevation of privileges.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceHP Device Manager versions prior to 5.0.10 contain a command injection vulnerability that could allow authenticated attackers to execute arbitrary commands on the system, potentially leading to elevation of privileges.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 5.0= 5.0.3= 5.0.4= 5.0.5= 5.0.6= 5.0.7= 5.0.7.1= 5.0.8= 5.0.9CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Verify HP Device Manager is installedCheck for HP Device Manager installation by looking in standard installation directories (typically C:\Program Files\HP\HP Device Manager) or via system inventory tools like the Windows Registry under HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\UninstallAffected if HP Device Manager software is found on the system
-
Determine installed versionOpen the HP Device Manager application and navigate to Help > About, or check the version in the Windows Registry at HKLM\SOFTWARE\HP\DeviceManager\VersionAffected if The displayed version matches 5.0, 5.0.3, 5.0.4, 5.0.5, 5.0.6, 5.0.7, 5.0.7.1, 5.0.8, or 5.0.9
-
Check if HP Device Manager service is runningOpen Services (services.msc) and locate the HP Device Manager service, or run 'sc query hpdevmgr' or 'Get-Service hpdevmgr' in PowerShellAffected if The service status shows as Running and the software is a vulnerable version listed above
-
Confirm authentication access existsReview user accounts with access to HP Device Manager management console or API endpointsAffected if Any valid user credentials exist for the HP Device Manager service, which would satisfy the authentication requirement for exploitation
The system is affected if HP Device Manager is installed, running version 5.0 through 5.0.9, and has an active service that accepts authenticated connections.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
dbcve · scopedUpgrade HP Device Manager to version 5.0.10 or later to remediate this vulnerability.
HPDM 5.0.10
- 1. Back up current HP Device Manager configuration and data
- 2. Download HP Device Manager version 5.0.10 or later from the official HP support website (support.hp.com)
- 3. Stop the HP Device Manager service
- 4. Install the updated HPDM 5.0.10 version
- 5. Verify the installation completed successfully
- 6. Start the HP Device Manager service
- 7. Confirm the service is running and accessible
Generated from the published advisory — verify against the referenced sources before acting.
- Consultation3.0 h
- Implementation2.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,832.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2023-26298 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2023-26298 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data