CVE-2023-43318
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedTP-Link JetStream Smart Switch TL-SG2210P 5.0 Build 20211201 allows attackers to escalate privileges via modification of the 'tid' and 'usrlvl' values in GET requests.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceThe TP-Link JetStream Smart Switch TL-SG2210P (firmware 5.0 Build 20211201) contains an insecure direct object reference or broken access control vulnerability that allows authenticated users to escalate privileges by manipulating 'tid' and 'usrlvl' parameters in GET requests, bypassing proper authorization checks.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 5.0CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the device modelAccess the switch web interface or check the physical device label to confirm the model is TP-Link JetStream Smart Switch TL-SG2210PAffected if The device is not a TL-SG2210P model, then this specific CVE does not apply
-
Check the firmware versionIn the web management interface, navigate to System > Firmware Upgrade or System > Device Info to view the installed firmware version. Look for version 5.0 Build 20211201Affected if The firmware version is 5.0 (Build 20211201), the device falls within the affected version range
-
Verify web management interface is enabledCheck if the HTTP/HTTPS web management interface is accessible by attempting to reach the switch IP address in a browserAffected if The web interface is enabled and reachable, which is required for the vulnerable parameter manipulation to occur
-
Confirm authenticated access capabilityVerify you have valid credentials to log into the switch web interfaceAffected if You have authenticated access to the switch, as this CVE requires an authenticated session to manipulate the tid and usrlvl parameters in GET requests
You are affected if you have a TP-Link TL-SG2210P switch running firmware version 5.0 with the web management interface enabled and accessible to an authenticated user who could manipulate the tid and usrlvl parameters.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply the latest vendor firmware update for the TL-SG2210P switch; if unavailable, restrict management interface access to trusted networks via ACLs or VPN, and segment the device in a restricted VLAN.
- Consultation3.0 h
- Implementation4.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,408.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2023-43318 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2023-43318 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data