ExpresswayApplication · Cisco
CVE-2024-20254
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedMultiple vulnerabilities in Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to conduct cross-site request forgery (CSRF) attacks that perform arbitrary actions on an affected device. Note: "Cisco Expressway Series" refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceMultiple CSRF vulnerabilities in Cisco Expressway Series (Expressway-C and Expressway-E) and Cisco TelePresence VCS allow unauthenticated remote attackers to perform arbitrary actions on affected devices by tricking authenticated administrators into visiting malicious web pages.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data
ExpresswayApplication
<= 15.0CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- Required
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the productAccess the web management interface and check the system information page, or use the CLI command 'show system' to confirm the device is Cisco Expressway (Expressway-C or Expressway-E) or Cisco TelePresence VCS.Affected if The device is not Cisco Expressway or TelePresence VCS.
-
Check the installed versionIn the web interface, go to System > Information to view the software version. From CLI, use 'show version' or 'xstatus systemunit' to retrieve the version number.Affected if The version is 15.0 or lower.
-
Verify management interface exposureCheck network accessibility of the web management interface (port 443). Review any firewall or ACL rules protecting the Expressway management port.Affected if The management interface is reachable from untrusted networks.
-
Confirm CSRF protection statusReview the web interface under Maintenance > Security Settings to see if CSRF protection is enabled. In CLI, use 'show security' to check security-related configurations.Affected if CSRF protection is disabled or not available in the current version.
The environment is affected if the device is Cisco Expressway or TelePresence VCS running software version 15.0 or lower and the management interface is accessible from untrusted networks.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply Cisco security updates for CVE-2024-20254; until patched, restrict management interface access to trusted networks and educate administrators about not clicking untrusted links.
Fix this in Expressway
Scoped from the published advisory
- Consultation2.0 h
- Implementation2.0 h
- Testing2.0 h
- Review / QA1.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $1,984.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2024-20254 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2024-20254 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data