CVE-2024-25002
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedCommand Injection in the diagnostics interface of the Bosch Network Synchronizer allows unauthorized users full access to the device.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceA command injection vulnerability exists in the diagnostics interface of Bosch Network Synchronizer devices. The vulnerability allows unauthenticated attackers to inject and execute arbitrary operating system commands, providing full device access and potentially enabling lateral movement within the network.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Verify if diagnostics interface is enabled on the deviceAccess the device administration interface and navigate to diagnostics or maintenance settings to confirm whether the diagnostics interface feature is currently activeAffected if The diagnostics interface is currently enabled on the device
-
Confirm the Bosch Network Synchronizer model and firmware versionLocate the device model information and firmware version through the administrative web interface, CLI, or device label, then compare against any vendor-published affected version rangesAffected if The installed firmware version falls within an affected version range if published by the vendor
-
Identify network accessibility of the diagnostics interfaceReview firewall rules, ACLs, and network segmentation configurations to determine if the diagnostics interface port or service is reachable from external or untrusted network segmentsAffected if The diagnostics interface is accessible from untrusted or external networks without proper access controls
-
Check for direct exposure to untrusted networksExamine the device network configuration to see if management or diagnostics interfaces are bound to WAN-facing interfaces or DMZ segments accessible to untrusted usersAffected if The diagnostics interface is bound to or accessible from WAN or untrusted network segments
-
Review authentication settings for diagnostics accessInspect authentication configuration for the diagnostics interface to confirm whether unauthenticated access is possible or if weak/default credentials may be in useAffected if Diagnostics interface permits unauthenticated access or uses default credentials
The environment is affected if the Bosch Network Synchronizer has the diagnostics interface enabled and it is exposed to untrusted networks without proper network segmentation or authentication controls.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataIsolate the diagnostics interface from untrusted networks using network segmentation and firewall rules. Apply vendor patches when available and disable remote diagnostics access if not required. Implement strict access controls to limit diagnostics interface exposure.
- Consultation4.0 h
- Implementation8.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2024-25002 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2024-25002 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data