CVE-2024-27263
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedIBM Sterling B2B Integrator 6.0.0.0 through 6.1.2.5 and 6.2.0.0 through 6.2.0.1 could allow an authenticated user to obtain sensitive information from the dashboard UI using man in the middle techniques.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceIBM Sterling B2B Integrator versions 6.0.0.0 through 6.1.2.5 and 6.2.0.0 through 6.2.0.1 contains an information disclosure vulnerability in the dashboard UI where an authenticated user could intercept sensitive information via man-in-the-middle network attacks, likely due to improper transport layer security enforcement.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data>= 6.0.0.0, <= 6.1.2.5>= 6.2.0.0, <= 6.2.0.1CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- High
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- None
- Availability
- None
CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:N/A:N
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify the installed IBM Sterling B2B Integrator versionLocate the version information in the product installation directory, typically in a version.properties or manifest file, or use the dashboard 'About' page if accessibleAffected if The installed version is 6.0.0.0 through 6.1.2.5 or 6.2.0.0 through 6.2.0.1
-
Determine if HTTP port is enabled for the dashboard UICheck network listener configurations or firewall rules to see if the product's web dashboard is accessible on port 80 (HTTP) in addition to port 443 (HTTPS)Affected if Port 80/HTTP is open and the dashboard responds without requiring HTTPS redirection
-
Verify SSL/TLS enforcement on the dashboard endpointAttempt to access the dashboard URL over plain HTTP (http://) and observe whether the connection is allowed, redirected to HTTPS, or rejectedAffected if The dashboard loads or partially loads over plain HTTP without forcing a redirect to HTTPS
-
Inspect the web server or load balancer SSL/TLS configurationReview the configuration files for the embedded web server or any front-end proxy (such as IBM HTTP Server or reverse proxy) to verify HTTPS is enforcedAffected if SSL/TLS is not configured or HTTPS is set to optional rather than required for dashboard communications
A user is affected if the installed version falls within the vulnerable ranges AND the dashboard UI is accessible over unencrypted HTTP or does not enforce TLS/HTTPS.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataEnforce TLS/HTTPS for all dashboard communications and ensure proper SSL/TLS configuration to prevent interception of sensitive data in transit.
- Consultation4.0 h
- Implementation8.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2024-27263 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2024-27263 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data