Rg Uac 6000 Cc FirmwareOperating system · Ruijie

CVE-2024-4504

HIGH · 7.2 CVSS v3.1 Published 2024-05-05
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
78/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC up to 20240428. Affected by this issue is some unknown functionality of the file /view/HAconfig/baseConfig/commit.php. The manipulation of the argument peer_ip/local_ip leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-263108. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

OS command injection vulnerability in Ruijie RG-UAC devices allows remote attackers to execute arbitrary system commands via unsanitized peer_ip or local_ip parameters in /view/HAconfig/baseConfig/commit.php. The vulnerability is exploitable remotely and a working exploit is publicly available.

MitigationApply available vendor firmware patches immediately; if no patch exists, restrict network access to the affected interface using firewall rules or network segmentation, and consider device replacement if the vendor does not provide a fix.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Rg Uac 6000 Cc FirmwareOperating system
Affected:all versions
Rg Uac 6000 E10 FirmwareOperating system
Affected:all versions
Rg Uac 6000 E10c FirmwareOperating system
Affected:all versions
Rg Uac 6000 E20 FirmwareOperating system
Affected:all versions
Rg Uac 6000 E20c FirmwareOperating system
Affected:all versions
Rg Uac 6000 E20m FirmwareOperating system
Affected:all versions
Rg Uac 6000 E50 FirmwareOperating system
Affected:all versions
Rg Uac 6000 E50c FirmwareOperating system
Affected:all versions

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
High
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model and firmware
    Access the device web interface or check the device label/model number to confirm it is a Ruijie RG-UAC 6000 series (CC, E10, E10c, E20, E20c, E20m, E50, or E50c).
    Affected if The device is any Ruijie RG-UAC 6000 model listed in the affected products.
  2. Verify vulnerable endpoint exists
    Attempt to access the file /view/HAconfig/baseConfig/commit.php via HTTP or HTTPS on the device. If the page loads or responds, the endpoint is present.
    Affected if The device responds to requests for /view/HAconfig/baseConfig/commit.php, indicating the vulnerable script exists.
  3. Check network exposure of management interface
    Determine if the device management interface (port 80/443 or the web UI port) is accessible from untrusted networks such as the public internet or less-trusted internal network segments. Use nmap or similar to test external connectivity.
    Affected if The device web management interface is reachable from untrusted networks without firewall restrictions.
  4. Review firewall or ACL rules protecting the device
    Inspect the network perimeter devices (firewalls, routers) to verify whether access to the device HTTP/HTTPS ports is blocked or restricted to authorized management IPs or VPN networks.
    Affected if There are no firewall rules or ACLs restricting access to the device management interface, or rules allow broad external access.

If the device is a Ruijie RG-UAC 6000 series and the /view/HAconfig/baseConfig/commit.php endpoint is accessible from an untrusted network, the environment is affected by this vulnerability.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Apply available vendor firmware patches immediately; if no patch exists, restrict network access to the affected interface using firewall rules or network segmentation, and consider device replacement if the vendor does not provide a fix.

Fix this in Rg Uac 6000 Cc Firmware Scoped from the published advisory
  • Consultation8.0 h
  • Implementation16.0 h
  • Testing8.0 h
  • Review / QA4.0 h
36.0 hours of engineering $6,400
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $10,240.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2024-4504 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2024-4504 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data