dbcve.org
QtsOperating system · Qnap

CVE-2024-53693

HIGH · 7.1 CVSS v3.1 Published 2025-03-07
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
77/100
Remediation priority · High
Remotely reachable Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
An improper neutralization of CRLF sequences ('CRLF Injection') vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow remote attackers who have gained user access to modify application data. We have already fixed the vulnerability in the following versions: QTS 5.2.3.3006 build 20250108 and later QuTS hero h5.2.3.3006 build 20250108 and later

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

CRLF Injection vulnerability in QNAP QTS and QuTS hero operating systems allows authenticated remote attackers to inject carriage return and line feed sequences, potentially modifying HTTP headers, response data, or application logs.

MitigationUpdate affected QNAP devices to QTS 5.2.3.3006 build 20250108 or QuTS hero h5.2.3.3006 build 20250108 or later versions.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
QtsOperating system
Affected:= 5.2.0.2737= 5.2.0.2744= 5.2.0.2782= 5.2.0.2802= 5.2.0.2823= 5.2.0.2851= 5.2.0.2860= 5.2.1.2930= 5.2.2.2950
Quts HeroOperating system
Affected:= h5.2.0.2737= h5.2.0.2782= h5.2.0.2789= h5.2.0.2802= h5.2.0.2823= h5.2.0.2851= h5.2.0.2860= h5.2.1.2929= h5.2.1.2940= h5.2.2.2952

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
Low
User interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
None
Availability
High

CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the QNAP operating system type
    Access the QNAP admin web interface and go to Control Panel > System > System Information, or run `getcfg system version` via SSH to determine if the device runs QTS or QuTS hero.
    Affected if The device runs QTS or QuTS hero operating system.
  2. Check the installed QTS version
    In the web interface, navigate to Control Panel > System > System Information > Firmware Version, or run `cat /etc/config/.qts_version` via SSH to retrieve the exact build number.
    Affected if The version matches any of these: 5.2.0.2737, 5.2.0.2744, 5.2.0.2782, 5.2.0.2802, 5.2.0.2823, 5.2.0.2851, 5.2.0.2860, 5.2.1.2930, or 5.2.2.2950.
  3. Check the installed QuTS hero version
    In the web interface, navigate to Control Panel > System > System Information > Firmware Version, or run `cat /etc/config/.qtshero_version` via SSH to retrieve the exact build number.
    Affected if The version matches any of these: h5.2.0.2737, h5.2.0.2782, h5.2.0.2789, h5.2.0.2802, h5.2.0.2823, h5.2.0.2851, h5.2.0.2860, h5.2.1.2929, h5.2.1.2940, or h5.2.2.2952.

The environment is affected if the installed QTS or QuTS hero version exactly matches one of the specific build numbers listed in the affected version ranges.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Update affected QNAP devices to QTS 5.2.3.3006 build 20250108 or QuTS hero h5.2.3.3006 build 20250108 or later versions.

Recommended fix High confidence

QTS 5.2.3.3006 (build 20250108) or later; QuTS hero h5.2.3.3006 (build 20250108) or later

  1. Identify whether the system is running QTS or QuTS hero by checking the NAS model and current firmware version
  2. For QTS systems: Upgrade to QTS 5.2.3.3006 (build 20250108) or later
  3. For QuTS hero systems: Upgrade to QuTS hero h5.2.3.3006 (build 20250108) or later
  4. After upgrade, verify the new version is applied by checking System Settings > About > Firmware Version

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Qts Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,200
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2024-53693 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2024-53693 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data