dbcve.org
Improper AuthenticationWeakness · CWE-287

CVE-2025-10463

HIGH · 7.3 CVSS v3.1 Published 2026-02-09
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
82/100
Remediation priority · High
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Improper Authentication vulnerability in Birtech Information Technologies Industry and Trade Ltd. Co. Senseway allows Authentication Abuse. This issue affects Senseway: through 09022026.  NOTE: Because the product was developed using outdated technology, the manufacturer is unable to fix the relevant vulnerabilities. Users of the Sensaway application are advised to contact the manufacturer and review updated products developed with newer technology.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Improper Authentication vulnerability in Birtech Senseway allows Authentication Abuse. The vulnerability exists in versions through 09022026. Due to the vendor using outdated technology, no patch is available.

MitigationNo vendor patch available. Organizations should contact Birtech for migration path to updated products developed with modern technology, or implement compensating controls such as network segmentation and strict access controls until replacement is feasible.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
Low
Availability
Low

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:L

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify Birtech Senseway installation
    Locate Birtech Senseway software on the system by checking installed programs, services, or running processes. Look for 'Senseway' or 'Birtech' in program listings, service names, or running daemon processes.
    Affected if Birtech Senseway software is found running or installed on the system
  2. Determine installed version
    Retrieve the version information of the Birtech Senseway installation. Check the software's about dialog, version file, or use command-line tools such as 'senseway -v', 'senseway --version', or check version metadata in the installation directory.
    Affected if The version returned is 09022026 or earlier (any version through 09022026)
  3. Verify authentication module is active
    Confirm that the authentication module or remote access feature of Senseway is enabled and accessible. Check configuration files for authentication settings, or verify the authentication service port is listening.
    Affected if Authentication module or remote authentication interface is enabled and accessible
  4. Assess network exposure
    Determine if the Senseway authentication interface is exposed to the network. Check firewall rules, binding addresses, and port listeners to see if the authentication service is reachable from network segments.
    Affected if The authentication interface is bound to network-accessible IP addresses or exposed beyond intended trust boundaries

A system is affected if Birtech Senseway is installed with a version through 09022026 and the authentication module is enabled and accessible.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

No vendor patch available. Organizations should contact Birtech for migration path to updated products developed with modern technology, or implement compensating controls such as network segmentation and strict access controls until replacement is feasible.

Recommended fix High confidence
  1. Contact Birtech Information Technologies Industry and Trade Ltd. Co. directly to request information on newer product versions with updated technology
  2. Evaluate migrating to alternative solutions from Birtech or other vendors that provide proper authentication mechanisms
  3. If replacement is not immediately possible, implement network segmentation to isolate the affected Senseway application from critical systems
  4. Apply compensating controls such as IP whitelisting, multi-factor authentication for adjacent systems, and enhanced logging/monitoring of authentication attempts
  5. Review USOM (www.usom.gov.tr) and siberguvenlik.gov.tr for any additional guidance or threat intelligence related to this vulnerability

Generated from the published advisory — verify against the referenced sources before acting.

Have this fixed Scoped from the published advisory
  • Consultation8.0 h
8.0 hours of engineering $1,600
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,560.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-10463 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

Get it on GitHub Scan in the browser

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-10463 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data