S1Application · Sonos

CVE-2025-1048

HIGH · 8.8 CVSS v3.0 Published 2025-04-23
Fix available
A fix is available. Upgrade to 57.22-61162 / 83.1-61240 or later.
See remediation →
93/100
Remediation priority · Urgent
No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Sonos Era 300 Speaker libsmb2 Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Sonos Era 300 speakers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of SMB data. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the anacapa user. Was ZDI-CAN-25535.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

A use-after-free vulnerability in libsmb2 library on Sonos Era 300 speakers allows network-adjacent attackers to achieve unauthenticated RCE by exploiting improper object lifecycle management during SMB data processing. The flaw lacks validation of object existence before operations, enabling memory corruption and code execution as the anacapa user.

MitigationApply Sonos firmware updates when available; until then, isolate Sonos devices on restricted network segments to limit attack surface from unauthenticated network-adjacent attackers.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
S1Application
Affected:< 57.22-61162
S2Application
Affected:< 83.1-61240

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Adjacent
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Confirm Sonos device model
    Identify if the device is a Sonos Era 300 speaker through physical inspection, Sonos app, or network discovery
    Affected if Device is a Sonos Era 300 speaker
  2. Check installed firmware version
    Open Sonos app, go to Settings > System > About my system and locate the firmware version; compare against vulnerable versions: S1 < 57.22-61162, S2 < 83.1-61240
    Affected if Firmware version is below 57.22-61162 (S1) or below 83.1-61240 (S2)
  3. Determine if SMB functionality is active
    Check Sonos app settings for SMB sharing or external storage configuration; the libsmb2 library is only engaged when SMB data processing is enabled
    Affected if SMB sharing or external storage with SMB is configured and active
  4. Assess network accessibility
    Verify if the Sonos device is reachable by unauthenticated network-adjacent attackers on the local network segment
    Affected if Device is on an unrestricted network segment allowing unauthenticated network-adjacent access

Environment is affected if it is a Sonos Era 300 running vulnerable firmware (S1 < 57.22-61162 or S2 < 83.1-61240) with SMB functionality enabled and accessible to unauthenticated network-adjacent attackers.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 57.22-61162 / 83.1-61240 or later
Fixed in 57.22-6116283.1-61240
Interim mitigation

Apply Sonos firmware updates when available; until then, isolate Sonos devices on restricted network segments to limit attack surface from unauthenticated network-adjacent attackers.

Recommended fix Moderate confidence

S1: 57.22-61162 or higher | S2: 83.1-61240 or higher

  1. 1. Open the Sonos app on your mobile device or computer
  2. 2. Navigate to Settings > System > System Updates
  3. 3. Check for available updates for your Sonos Era 300 speaker
  4. 4. If an update is available, select and install the update
  5. 5. After installation, verify the firmware version has been updated to S1: 57.22-61162 or higher, or S2: 83.1-61240 or higher
  6. 6. Confirm the speaker is functioning normally after the update
Caveat Standard firmware update risks apply - ensure stable power and network connection during update

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in S1 Scoped from the published advisory
  • Consultation8.0 h
  • Implementation4.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,280
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,248.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-1048 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-1048 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data