CVE-2025-26062
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedAn access control issue in Intelbras RX1500 v2.2.9 and RX3000 v1.0.11 allows unauthenticated attackers to access the router's settings file and obtain potentially sensitive information from the current settings.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceIntelbras RX1500 and RX3000 routers contain an authentication bypass vulnerability allowing unauthenticated attackers to directly access the device's settings configuration file. This exposes sensitive configuration data including network parameters, credentials, and other router settings without requiring any valid credentials.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 2.2.9= 1.0.11CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify device modelAccess the router's web interface or CLI and look for the model identifier (RX1500 or RX3000) in the system information or status pageAffected if Device is not an Intelbras RX1500 or RX3000 model - not affected
-
Check firmware version on RX1500Navigate to the router's administration page, typically under 'System' > 'Firmware' or 'Status' > 'Device Info', and record the firmware version numberAffected if Firmware version is 2.2.9 - affected
-
Check firmware version on RX3000Navigate to the router's administration page, typically under 'System' > 'Firmware' or 'Status' > 'Device Info', and record the firmware version numberAffected if Firmware version is 1.0.11 - affected
-
Verify management interface exposureCheck router network configuration to determine if the web management interface (HTTP/HTTPS on ports 80/443 or custom ports) is reachable from untrusted networks or the public internetAffected if Management interface is exposed to untrusted networks - potential exposure
A user is affected if they have an Intelbras RX1500 running firmware 2.2.9 or an RX3000 running firmware 1.0.11, especially if the router's management interface is accessible from untrusted networks.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply vendor-supplied firmware patches when available. As an immediate workaround, restrict network access to the router's management interface using firewall rules or network segmentation to prevent unauthorized external access.
- Consultation2.0 h
- Implementation3.0 h
- Testing2.0 h
- Review / QA1.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $2,272.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-26062 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-26062 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data