CVE-2025-27671
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedVasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 Application 20.0.1923 allows Device Impersonation OVE-20230524-0015.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceVasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.843 and Application 20.0.1923 contains a device impersonation vulnerability (OVE-20230524-0015) that allows attackers to masquerade as legitimate devices on the network, potentially enabling unauthorized access to the print infrastructure, interception of print jobs, or lateral movement.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 20.0.1923< 22.0.843CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- None
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Check Virtual Appliance Host versionAccess the Virtual Appliance admin interface and navigate to System Settings > About, or run the command 'pl-boot --version' or check the Appliance Info panel in the admin dashboardAffected if The displayed version is below 22.0.843
-
Check Application versionAccess the PrinterLogic/Vasion Print admin console, go to Administration > Application Settings > About, or check the version displayed on the login page or in the footer of the web interfaceAffected if The displayed version is below 20.0.1923
-
Verify device impersonation exposureReview network configuration to confirm if the print server allows device enrollment or registration from unauthenticated network segments without strong device certificate validationAffected if Devices can join the print infrastructure without verified credentials or certificate-based authentication
The environment is affected if either the Virtual Appliance Host version is below 22.0.843 or the Application version is below 20.0.1923, especially if unauthenticated device enrollment is permitted on the network.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
dbcve · scoped20.0.192322.0.843
Upgrade Vasion Print Virtual Appliance Host to version 22.0.843 or later and Application to version 20.0.1923 or later to remediate this device impersonation vulnerability.
Vasion Print Application 20.0.1923 / Virtual Appliance Host 22.0.843 or later
- Upgrade Vasion Print (Application) to version 20.0.1923 or later
- Upgrade Virtual Appliance Host to version 22.0.843 or later
- After upgrading, verify the Device Impersonation vulnerability (OVE-20230524-0015) is resolved by confirming only authenticated devices can communicate with the Vasion Print server
- Consult help.printerlogic.com for detailed upgrade instructions specific to your deployment type
Generated from the published advisory — verify against the referenced sources before acting.
- Consultation4.0 h
- Implementation8.0 h
- Testing6.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,600.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-27671 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-27671 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data