CVE-2025-32813
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedAn issue was discovered in Infoblox NETMRI before 7.6.1. Remote Unauthenticated Command Injection can occur.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · high confidenceA remote unauthenticated command injection vulnerability exists in Infoblox NETMRI versions prior to 7.6.1. An attacker can execute arbitrary operating system commands on the target NETMRI appliance without any authentication credentials, potentially leading to complete system compromise.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data< 7.6.1CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Network
- Complexity
- Low
- Privileges
- High
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Identify NETMRI appliance versionLog into the NETMRI web interface and navigate to the About or System Information page, or run 'netmri version' via the appliance CLIAffected if The displayed version is lower than 7.6.1 (for example, 7.5.0, 7.4.2, etc.)
-
Confirm version via API if availableQuery the NETMRI API endpoint /api/3.0/system/info or similar version endpoint using an authenticated session or documented unauthenticated endpointAffected if The API response shows a version number below 7.6.1
-
Assess network exposure of management interfaceDetermine if the NETMRI management web interface (typically ports 80, 443) is accessible from untrusted networks or the public internet by reviewing firewall rules or network segmentationAffected if The management interface is directly accessible from untrusted networks without VPN or IP restrictions
You are affected if your installed NETMRI version is below 7.6.1 and the management interface is network-accessible to potential attackers.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
dbcve · scoped7.6.1
Upgrade Infoblox NETMRI to version 7.6.1 or later to remediate this vulnerability. If immediate patching is not possible, restrict network access to the NETMRI management interface to trusted IP addresses and monitor for Indicators of Compromise.
NetMRI version 7.6.1 or later
- 1. Schedule a maintenance window for the upgrade procedure
- 2. Back up the current NetMRI configuration and database according to Infoblox documentation
- 3. Download the NetMRI 7.6.1 (or latest stable) upgrade package from support.infoblox.com
- 4. Follow Infoblox's standard upgrade procedure for the NETMRI appliance
- 5. After upgrade, verify the version number shows 7.6.1 or later in the web interface or CLI
- 6. Test that core functionality (device discovery, monitoring, scripting) operates normally
- 7. Validate that the command injection vulnerability is no longer present
Generated from the published advisory — verify against the referenced sources before acting.
- Consultation3.0 h
- Implementation4.0 h
- Testing3.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,408.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-32813 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-32813 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data