Indoor Connect 8855 FirmwareOperating system · Ericsson

CVE-2025-40836

CRITICAL · 9.8 CVSS v3.1 Published 2025-09-25
Fix available
A fix is available. Upgrade to 2025.q2 or later.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

Ericsson Indoor Connect 8855 contains an improper input validation vulnerability that allows authenticated or unauthenticated attackers to execute arbitrary commands with escalated (likely root or administrator) privileges. The vulnerability stems from insufficient validation of user-supplied input in the device firmware, enabling command injection.

MitigationApply the vendor-supplied firmware patch when available; until then, restrict network access to the device management interfaces and monitor for suspicious command execution patterns.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Indoor Connect 8855 FirmwareOperating system
Affected:< 2025.q2

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the device firmware version
    Access the device admin interface or check the system information page via the web UI or CLI command (typically available through 'show version' or 'system info' commands). Compare the displayed firmware version against the affected range: any version prior to 2025.q2 is vulnerable.
    Affected if Firmware version is below 2025.q2 (e.g., 2024.x, 2025.q1, or any earlier release).
  2. Verify management interface exposure
    Determine if the device management web interface or CLI ports (typically HTTP/HTTPS on ports 80/443, or SSH on port 22) are reachable from untrusted networks. Use network scanning tools or check firewall rules to list accessible IPs/ports.
    Affected if The management interface is accessible from external networks or untrusted VLANs without VPN or IP restriction.
  3. Review authentication logs for unusual entries
    Check the device system logs or authentication logs for failed login attempts, especially those containing malformed input, or successful logins from unknown IP addresses. Look for entries indicating command injection attempts.
    Affected if Logs show repeated authentication failures with special characters, unexpected commands in login fields, or unauthorized successful logins.
  4. Inspect for unauthorized processes or files
    Examine running processes on the device (if CLI access is available) for unknown or suspicious processes. Check for newly created files in system directories that were not part of the original firmware.
    Affected if Unexpected processes are running or unauthorized scripts/executables exist in system directories.

A user is affected if their Ericsson Indoor Connect 8855 runs firmware version lower than 2025.q2 AND has its management interface exposed to network access.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 2025.q2 or later
Fixed in 2025.q2
Interim mitigation

Apply the vendor-supplied firmware patch when available; until then, restrict network access to the device management interfaces and monitor for suspicious command execution patterns.

Recommended fix Moderate confidence

2025.q2 or later firmware for Ericsson Indoor Connect 8855

  1. 1. Identify the current firmware version of the Ericsson Indoor Connect 8855 device
  2. 2. Access the device management interface or use the vendor-provided firmware update mechanism
  3. 3. Obtain the firmware version 2025.q2 or later from Ericsson's official support channels
  4. 4. Apply the firmware update following the vendor's documented upgrade procedure
  5. 5. Verify the upgrade was successful by confirming the new firmware version
  6. 6. Validate that the vulnerability is resolved by testing the input validation functionality
Caveat Review Ericsson release notes for 2025.q2 to check for any configuration or feature changes that may require adjustment

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in Indoor Connect 8855 Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing6.0 h
  • Review / QA4.0 h
22.0 hours of engineering $3,860
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $6,176.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-40836 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-40836 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data