W1a75a FirmwareOperating system · Hp

CVE-2025-43018

MEDIUM · 5.3 CVSS v3.1 Published 2025-07-30
Fix available
A fix is available. Upgrade to 002.2508a or later.
See remediation →
62/100
Remediation priority · Elevated
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
Certain HP LaserJet Pro printers may be vulnerable to information disclosure when a non-authenticated user queries a device’s local address book.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · high confidence

HP LaserJet Pro printers contain an information disclosure vulnerability where a non-authenticated remote attacker can query the device's local address book, exposing stored contact information without any authentication credentials.

MitigationRestrict network access to printer management interfaces via firewall rules or network segmentation; apply vendor firmware updates when available; disable unused remote access features.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
W1a75a FirmwareOperating system
Affected:< 002.2508a
W1a76a FirmwareOperating system
Affected:< 002.2508a
W1a77a FirmwareOperating system
Affected:< 002.2508a
W1a81a FirmwareOperating system
Affected:< 002.2508a
W1a82a FirmwareOperating system
Affected:< 002.2508a
W1a79a FirmwareOperating system
Affected:< 002.2508a
W1a80a FirmwareOperating system
Affected:< 002.2508a
W1a78a FirmwareOperating system
Affected:< 002.2508a

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
Low
Integrity
None
Availability
None

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify the printer model
    Check the printer's web interface, control panel, or print a configuration page to confirm the model number. Look for one of: W1a75a, W1a76a, W1a77a, W1a81a, W1a82a, W1a79a, W1a80a, W1a78a.
    Affected if The printer model matches one of the affected product codes.
  2. Check the firmware version
    Access the printer's embedded web server (EWS) via its IP address, navigate to the General or Information tab, and record the firmware version displayed.
    Affected if The firmware version is below 002.2508a.
  3. Verify address book accessibility
    From a network-connected system, attempt to access the address book endpoint on the printer without providing any login credentials. This is typically found at a URL path like /hp/device/addressbook or /addressbook on the printer's IP.
    Affected if The address book data is returned without requiring authentication.
  4. Confirm remote management is enabled
    In the printer EWS, go to the Networking or Security tabs and check if remote management, embedded web server, or network scanning features are enabled.
    Affected if Remote management interfaces are accessible over the network.

The printer is affected if it is one of the listed models, runs firmware below 002.2508a, and allows unauthenticated access to the local address book via its web interface.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

dbcve · scoped
Upgrade available Upgrade to 002.2508a or later
Fixed in 002.2508a
Interim mitigation

Restrict network access to printer management interfaces via firewall rules or network segmentation; apply vendor firmware updates when available; disable unused remote access features.

Recommended fix High confidence

Firmware version 002.2508a or later

  1. Identify your HP LaserJet Pro model number (W1a75a, W1a76a, W1a77a, W1a78a, W1a79a, W1a80a, W1a81a, or W1a82a)
  2. Access the printer's embedded web server by entering its IP address in a web browser
  3. Navigate to the 'General' or 'Information' tab to check the current firmware version
  4. If the firmware version is below 002.2508a, download the latest firmware update from HP support (support.hp.com) for your specific model
  5. Follow HP's firmware update instructions, typically via the printer's firmware upgrade feature in the web interface or using the HP Smart software

Generated from the published advisory — verify against the referenced sources before acting.

Fix this in W1a75a Firmware Scoped from the published advisory
  • Consultation4.0 h
  • Implementation8.0 h
  • Testing4.0 h
  • Review / QA2.0 h
18.0 hours of engineering $3,200
Get the upgrade done

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $5,120.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-43018 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-43018 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data