CVE-2025-62405
Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.
NVD · uneditedHeap-based Buffer Overflow vulnerability in TP-Link Archer AX53 v1.0 (tmpserver modules) allows authenticated adjacent attackers to cause a segmentation fault or potentially execute arbitrary code via a specially crafted network packet containing a field whose length exceeds the maximum expected value.This issue affects Archer AX53 v1.0: through 1.3.1 Build 20241120.
Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.
dbcve analysis · moderate confidenceHeap-based buffer overflow in the tmpserver module of TP-Link Archer AX53 v1.0 allows authenticated adjacent attackers to send specially crafted network packets containing a field exceeding the maximum expected length, leading to heap corruption that can cause denial of service (segmentation fault) or potentially arbitrary code execution.
Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.
Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.
NVD · CPE data= 1.0CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.
From the vector- Attack vector
- Adjacent
- Complexity
- Low
- Privileges
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- High
CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.
dbcve checksWork through these to decide whether this CVE applies to you.
-
Confirm device modelAccess the router web interface or check the device label to verify the exact model is TP-Link Archer AX53Affected if Device is not an Archer AX53 model
-
Check firmware versionLog into the router admin panel (typically at 192.168.0.1) and navigate to Status or System settings to view the installed firmware versionAffected if Firmware version is 1.0 Build [any]
-
Verify tmpserver module availabilityCheck router web interface under Advanced or NAT settings for tmpserver, or attempt to access the tmpserver port (commonly 20000/tcp if exposed) from the local network using a tool like netcat or nmapAffected if tmpserver module is exposed and accessible on the local network
-
Assess network exposureFrom a computer on the same LAN, scan the router IP for open ports using nmap (e.g., nmap -p 20000 <router-ip>) to determine if tmpserver is listening on adjacent network interfacesAffected if tmpserver port is open and reachable from the local subnet without additional access controls
You are affected if you are running TP-Link Archer AX53 firmware version 1.0 and the tmpserver module is enabled and accessible from the adjacent network.
Generated from the published advisory. Verify against your own configuration.
Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.
From vendor dataApply vendor-supplied firmware updates when available; in the interim, restrict network access to the affected device to trusted authenticated users only and disable unnecessary adjacent network attack vectors.
- Consultation4.0 h
- Implementation2.0 h
- Testing4.0 h
- Review / QA2.0 h
An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $3,392.
Scan for this in your stack
Free · runs locallyCheck whether your project pulls in CVE-2025-62405 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.
References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.
Primary sourcesPractitioner notes
ContributedPeer-ranked notes from engineers who’ve handled CVE-2025-62405 in production — separate from our analysis above.
The advisory tells you what broke. It rarely tells you what actually worked. If you’ve dealt with this one, that detail is what the next engineer is searching for.
- The version that genuinely resolved it — not the one the vendor claimed
- A config change or rule that shut the vector down
- A gotcha in the upgrade path that cost you an afternoon
No notes yet
Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.
A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.
- Verified mitigations, workarounds, and config changes
- Version or environment caveats, and links to real fixes
- No weaponised exploit code, or anything meant to cause harm
- No spam, self-promotion, credentials, or personal data