Meatmeet Pro Wifi \& Bluetooth Meat Thermometer FirmwareOperating system · Meatmeet

CVE-2025-65823

CRITICAL · 9.8 CVSS v3.1 Published 2025-12-10
Mitigation only
No fix yet — a mitigation exists. There is no fixed release. A documented workaround reduces exposure in the meantime.
See remediation →
100/100
Remediation priority · Urgent
Remotely reachable No privileges Zero-click

Official description Straight from the sourceThe vendor's or NVD's own wording, published unedited. Authoritative, but often terse — it says what broke, rarely what to do.

NVD · unedited
The Meatmeet Pro was found to be shipped with hardcoded Wi-Fi credentials in the firmware, for the test network it was developed on. If an attacker retrieved this, and found the physical location of the Wi-Fi network, they could gain unauthorized access to the Wi-Fi network of the vendor. Additionally, if an attacker were located in close physical proximity to the device when it was first set up, they may be able to force the device to auto-connect to an attacker-controlled access point by setting the SSID and password to the same as which was found in the firmware file.

Technical summary Written by usOur analysis, written from the advisory, the CVSS vector and the affected-version data. It adds context the advisory leaves out, and never invents facts that are not in the source.

dbcve analysis · moderate confidence

The Meatmeet Pro device ships with hardcoded Wi-Fi credentials embedded in the firmware. An attacker who extracts these credentials from firmware and locates the corresponding physical Wi-Fi network can gain unauthorized network access. Additionally, an attacker in close proximity during initial device setup could perform an evil twin attack by deploying an access point with the same SSID and password found in the firmware.

MitigationRemove all hardcoded Wi-Fi credentials from the firmware and implement a secure credential provisioning mechanism such as device-specific random credentials or customer-configurable credentials during initial setup. The vendor should also rotate any exposed credentials on their network.

Verify against the referenced sources before acting — the references below are authoritative for this CVE, this summary is not.

Affected products & versions What the vendor confirmedThe version ranges the vendor confirmed as vulnerable. If your version sits inside a range here, treat yourself as exposed until you have upgraded.

NVD · CPE data
Meatmeet Pro Wifi \& Bluetooth Meat Thermometer FirmwareOperating system
Affected:= 1.0.34.4

CVSS breakdown How the score is builtThe industry scoring standard. It rates how the flaw is reached, what it takes to exploit, and what an attacker gains — the score is derived from those, not the other way round.

From the vector
Attack vector
Network
Complexity
Low
Privileges
None
User interaction
None
Scope
Unchanged
Confidentiality
High
Integrity
High
Availability
High

CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Am I affected? How to checkSteps we derive from the advisory and the affected-version data, so you can decide whether this CVE reaches your setup. They are a guide, not a scan — your own configuration is the authority.

dbcve checks

Work through these to decide whether this CVE applies to you.

  1. Identify device model and firmware version
    Access the device settings or use the manufacturer's app to view the firmware version. For the Meatmeet Pro, check the device settings or companion mobile application for the installed firmware version number.
    Affected if The firmware version displayed is 1.0.34.4, indicating the affected version.
  2. Extract firmware for credential analysis
    If you have access to firmware update files or can extract firmware from the device, use binwalk, strings, or similar firmware analysis tools to search for Wi-Fi related strings such as SSID, password, PSK, or network credentials.
    Affected if Plaintext or easily decoded Wi-Fi credentials (SSID and password) are found embedded within the firmware binary.
  3. Inspect device Wi-Fi configuration
    Connect to the device's admin interface or check the device's configuration files (if accessible via debug mode or rooted device) for stored Wi-Fi network settings.
    Affected if The device configuration shows hardcoded network credentials that match default or vendor-associated SSID/password combinations rather than user-provisioned credentials.
  4. Verify network exposure
    Check whether the device is accessible on a network that could be reached by an attacker who extracted the credentials from the firmware.
    Affected if The device is connected to a network accessible beyond the user's local trusted network, and the device uses the hardcoded credentials from the affected firmware.

A user is affected if they are using a Meatmeet Pro device with firmware version 1.0.34.4 and the device contains hardcoded Wi-Fi credentials in its firmware that could be extracted by an attacker.

Generated from the published advisory. Verify against your own configuration.

Check your environment

Paste your version and any relevant configuration and it will be compared against the affected criteria above. Do not include secrets or credentials.

AI-assisted, checked against the advisory. Informational, not a guarantee.

Remediation Closing itWhat it takes to close this. Where a vendor fix exists we point at it; where none exists we say so plainly, and can build one. Effort estimates are scoped from the advisory, not from your codebase.

From vendor data
Mitigation available No clean upgrade yet — mitigate in the meantime
Mitigation

Remove all hardcoded Wi-Fi credentials from the firmware and implement a secure credential provisioning mechanism such as device-specific random credentials or customer-configurable credentials during initial setup. The vendor should also rotate any exposed credentials on their network.

Fix this in Meatmeet Pro Wifi \& Bluetooth Meat Thermometer Firmware Scoped from the published advisory
  • Consultation6.0 h
  • Implementation16.0 h
  • Testing8.0 h
  • Review / QA4.0 h
34.0 hours of engineering $6,000
Get help mitigating

An estimate, not a bill — we confirm scope with you before any work starts. Need it this week? Rush from $9,600.

Scan for this in your stack

Free · runs locally
dbcve dependency scanner

Check whether your project pulls in CVE-2025-65823 — or any other known-vulnerable package — straight from your lock files. Free and open source; it runs locally and uploads nothing.

References Go to the primary sourcePrimary sources — vendor advisories, patches and trackers. Where our summary and a reference disagree, the reference wins.

Primary sources

Practitioner notes

Contributed

Peer-ranked notes from engineers who’ve handled CVE-2025-65823 in production — separate from our analysis above.

No notes yet

Be the first to add a field note for this CVE — a mitigation you’ve verified, a version caveat, or a link to a working fix. Sign in above to contribute.

What this is

A place for practitioners to share what actually worked: a mitigation you’ve tested, a configuration change, a version- or environment-specific caveat, or a link to a verified patch. The most useful notes rise to the top as peers upvote them, so the signal stays high.

What belongs here
  • Verified mitigations, workarounds, and config changes
  • Version or environment caveats, and links to real fixes
  • No weaponised exploit code, or anything meant to cause harm
  • No spam, self-promotion, credentials, or personal data